Hello all, I am spinning up on sel4 and having difficulty booting a kernel on a Jetson TK1 board. I have successfully downloaded the cmakes repo and can build the x86 version of the code and run it as a simulation. I can also successfully build the TK1 version by changing the -DARCHETECTURE argument passed to init-build.sh to “tk1”. This results in a single image file named “capdl-loader-image-arm-tk1” to show up in my images folder (as opposed to both a kernel image and “userland” image that get created in the x86 version).
So… I put that image on an SD card, plug it into the TK1, boot to a uboot prompt, and load the image using the command “fatload mmc 1 0x82000000 <filename>”. I can use “md” to see that the image is actually loaded properly. However, when I type “go 0x82000000” I see no output what so ever going out of the serial port. What I expect to see is similar output to what was displayed in the x86 simulation. I posted the question to the IRC channel yesterday and someone suggested using bootm or bootelf. No luck with either of these. So… hoping someone here might be able to give me a clue. — Travis _______________________________________________ Devel mailing list [email protected] https://sel4.systems/lists/listinfo/devel
