Hello XFree developer team,
I recently got the new Apple Powerbook G4 12".
GPU is a Geforce4 440 Go 64M (lspci -vv attached).

I'm running X 4.3 for Debian from http://penguinppc.org/~daniels/. It 
works so far, but the framebuffer (openfirmware framebuffer) doesn't 
get restored correctly if I quit X or change with ctrl-alt-F1 back to 
console. The screen stays black but I can do everything as normal (type 
"reboot" blindly or switch back to X, ...).

Perhaps the nvidia driver does not handle the console switch 
correctly... or there is a bug within the openfirmware framebuffer 
driver.

best regards,
Christoph
00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
        Latency: 16, cache line size 08
        Capabilities: [80] AGP version 1.0
                Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- 
FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

00:10.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 440 Go 64M] (rev 
a3) (prog-if 00 [VGA])
        Subsystem: nVidia Corporation: Unknown device 0010
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 48
        Region 0: Memory at 91000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at 94000000 (32-bit, prefetchable) [size=64M]
        Region 2: Memory at f1000000 (32-bit, prefetchable) [size=512K]
        Expansion ROM at 90000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [44] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- 
FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

10:0b.0 Host bridge: Apple Computer Inc.: Unknown device 0035
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
        Latency: 16, cache line size 08

10:12.0 Network controller: Broadcom Corporation: Unknown device 4320 (rev 02)
        Subsystem: Apple Computer Inc.: Unknown device 004e
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 16
        Interrupt: pin A routed to IRQ 52
        Region 0: Memory at 80084000 (32-bit, non-prefetchable) [disabled] [size=8K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

10:17.0 Class ff00: Apple Computer Inc.: Unknown device 003e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 16, cache line size 08
        Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]

10:18.0 USB Controller: Apple Computer Inc.: Unknown device 003f (prog-if 10 [OHCI])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 16 (750ns min, 21500ns max), cache line size 08
        Interrupt: pin A routed to IRQ 27
        Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]

10:19.0 USB Controller: Apple Computer Inc.: Unknown device 003f (prog-if 10 [OHCI])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 16 (750ns min, 21500ns max), cache line size 08
        Interrupt: pin A routed to IRQ 28
        Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]

10:1a.0 USB Controller: Apple Computer Inc.: Unknown device 003f (prog-if 10 [OHCI])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 16 (750ns min, 21500ns max), cache line size 08
        Interrupt: pin A routed to IRQ 29
        Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K]

20:0b.0 Host bridge: Apple Computer Inc.: Unknown device 0036
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
        Latency: 16, cache line size 08

20:0d.0 Class ff00: Apple Computer Inc.: Unknown device 003b
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR+
        Latency: 32, cache line size 08
        Interrupt: pin ? routed to IRQ 39
        Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]

20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) 
(prog-if 10 [OHCI])
        Subsystem: Apple Computer Inc.: Unknown device 5811
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 40
        Region 0: Memory at f5000000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR+
        Latency: 6 (16000ns min, 16000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 41
        Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
        Expansion ROM at f5100000 [disabled] [size=1M]

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED]  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.2.99.901 (4.3.0 RC 1) (Debian 4.2.99.901-1 20030209093023 [EMAIL 
PROTECTED])
Release Date: 4 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-ben1 ppc [ELF] 
Build Date: 09 February 2003
        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.20-ben6 ([EMAIL PROTECTED]) (gcc version 3.2.3 20030210 
(Debian prerelease)) #1 Wed Feb 26 21:14:24 CET 2003 
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Feb 27 02:01:33 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "LCD"
(**) |   |-->Device "NVidia Geforce4 440 Go"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "macintosh"
(**) XKB: model: "macintosh"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
        Entry deleted from font path.
(**) FontPath set to 
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
        XFree86 ANSI C Emulation: 0.2
        XFree86 Video Driver: 0.6
        XFree86 XInput driver : 0.4
        XFree86 Server Extension : 0.2
        XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0034 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 10de,0179 card 10de,0010 rev a3 class 03,00,00 hdr 00
(II) PCI: 10:0b:0: chip 106b,0035 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 10:12:0: chip 14e4,4320 card 106b,004e rev 02 class 02,80,00 hdr 00
(II) PCI: 10:17:0: chip 106b,003e card 0000,0000 rev 00 class ff,00,00 hdr 00
(II) PCI: 10:18:0: chip 106b,003f card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:19:0: chip 106b,003f card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:1a:0: chip 106b,003f card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 20:0b:0: chip 106b,0036 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 20:0d:0: chip 106b,003b card 0000,0000 rev 00 class ff,00,00 hdr 00
(II) PCI: 20:0e:0: chip 106b,0031 card 106b,5811 rev 81 class 0c,00,10 hdr 00
(II) PCI: 20:0f:0: chip 106b,0032 card 0000,0000 rev 80 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:11:0), (0,0,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 16: bridge is at (16:11:0), (16,16,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 16 I/O range:
        [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 16 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 16 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 32: bridge is at (32:11:0), (32,32,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 32 I/O range:
        [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 32 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 32 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:16:0) nVidia Corporation NV17 [GeForce4 440 Go 64M] rev 163, Mem @ 
0x91000000/24, 0x94000000/26, 0xf1000000/19, BIOS @ 0x90000000/17
(II) Addressable bus resource ranges are
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [3] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
        [0] -1  0       0xf5200000 - 0xf53fffff (0x200000) MX[B]
        [1] -1  0       0xf5004000 - 0xf5007fff (0x4000) MX[B]
        [2] -1  0       0x80080000 - 0x80080fff (0x1000) MX[B]
        [3] -1  0       0x80081000 - 0x80081fff (0x1000) MX[B]
        [4] -1  0       0x80082000 - 0x80082fff (0x1000) MX[B]
        [5] -1  0       0x80000000 - 0x8007ffff (0x80000) MX[B]
        [6] -1  0       0x90000000 - 0x9001ffff (0x20000) MX[B](B)
        [7] -1  0       0xf1000000 - 0xf107ffff (0x80000) MX[B](B)
        [8] -1  0       0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
        [9] -1  0       0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
(II) Inactive PCI resource ranges:
        [0] -1  0       0xf5000000 - 0xf5000fff (0x1000) MX[B]
        [1] -1  0       0x80084000 - 0x80085fff (0x2000) MX[B]
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0       0xf5200000 - 0xf53fffff (0x200000) MX[B]
        [1] -1  0       0xf5004000 - 0xf5007fff (0x4000) MX[B]
        [2] -1  0       0x80080000 - 0x80080fff (0x1000) MX[B]
        [3] -1  0       0x80081000 - 0x80081fff (0x1000) MX[B]
        [4] -1  0       0x80082000 - 0x80082fff (0x1000) MX[B]
        [5] -1  0       0x80000000 - 0x8007ffff (0x80000) MX[B]
        [6] -1  0       0x90000000 - 0x9001ffff (0x20000) MX[B](B)
        [7] -1  0       0xf1000000 - 0xf107ffff (0x80000) MX[B](B)
        [8] -1  0       0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
        [9] -1  0       0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
        [0] -1  0       0xf5000000 - 0xf5000fff (0x1000) MX[B]
        [1] -1  0       0x80084000 - 0x80085fff (0x2000) MX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [3] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0xf5200000 - 0xf53fffff (0x200000) MX[B]
        [3] -1  0       0xf5004000 - 0xf5007fff (0x4000) MX[B]
        [4] -1  0       0x80080000 - 0x80080fff (0x1000) MX[B]
        [5] -1  0       0x80081000 - 0x80081fff (0x1000) MX[B]
        [6] -1  0       0x80082000 - 0x80082fff (0x1000) MX[B]
        [7] -1  0       0x80000000 - 0x8007ffff (0x80000) MX[B]
        [8] -1  0       0x90000000 - 0x9001ffff (0x20000) MX[B](B)
        [9] -1  0       0xf1000000 - 0xf107ffff (0x80000) MX[B](B)
        [10] -1 0       0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
        [11] -1 0       0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
        [12] -1 0       0xf5000000 - 0xf5000fff (0x1000) MX[B]
        [13] -1 0       0x80084000 - 0x80085fff (0x2000) MX[B]
        [14] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [15] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols 
found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols 
found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols 
found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":  No symbols 
found
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 2.0.1
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.13.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o":  No symbols found
(II) Module speedo: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.1
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.2
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.1
        Module class: XFree86 Video Driver
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        Module class: XFree86 XInput Driver
        ABI class: XFree86 XInput driver, version 0.4
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Vanta,
        RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
        GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
        GeForce2 Go, Quadro2 MXR/EX/Go, GeForce2 Integrated GPU,
        GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro,
        GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
        GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
        GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
        GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
        GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
        GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
        Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
        GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
        GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
        0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
        Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
        GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
        Quadro4 980 XGL, Quadro4 780 XGL, 0x0300, GeForce FX 5800 Ultra,
        GeForce FX 5800, Quadro FX 2000, Quadro FX 1000, 0x0311, 0x0312,
        0x0316, 0x0317, 0x0318, 0x0319, 0x031A, 0x031B, 0x031C, 0x031D,
        0x031E, 0x031F, 0x0321, 0x0322, 0x0323, 0x0326, 0x032A, 0x032B,
        0x032E
(II) Primary Device is: PCI 00:10:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce4 440 Go 64M found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0xf5200000 - 0xf53fffff (0x200000) MX[B]
        [3] -1  0       0xf5004000 - 0xf5007fff (0x4000) MX[B]
        [4] -1  0       0x80080000 - 0x80080fff (0x1000) MX[B]
        [5] -1  0       0x80081000 - 0x80081fff (0x1000) MX[B]
        [6] -1  0       0x80082000 - 0x80082fff (0x1000) MX[B]
        [7] -1  0       0x80000000 - 0x8007ffff (0x80000) MX[B]
        [8] -1  0       0x90000000 - 0x9001ffff (0x20000) MX[B](B)
        [9] -1  0       0xf1000000 - 0xf107ffff (0x80000) MX[B](B)
        [10] -1 0       0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
        [11] -1 0       0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
        [12] -1 0       0xf5000000 - 0xf5000fff (0x1000) MX[B]
        [13] -1 0       0x80084000 - 0x80085fff (0x2000) MX[B]
        [14] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [15] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0       0xf5200000 - 0xf53fffff (0x200000) MX[B]
        [3] -1  0       0xf5004000 - 0xf5007fff (0x4000) MX[B]
        [4] -1  0       0x80080000 - 0x80080fff (0x1000) MX[B]
        [5] -1  0       0x80081000 - 0x80081fff (0x1000) MX[B]
        [6] -1  0       0x80082000 - 0x80082fff (0x1000) MX[B]
        [7] -1  0       0x80000000 - 0x8007ffff (0x80000) MX[B]
        [8] -1  0       0x90000000 - 0x9001ffff (0x20000) MX[B](B)
        [9] -1  0       0xf1000000 - 0xf107ffff (0x80000) MX[B](B)
        [10] -1 0       0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
        [11] -1 0       0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
        [12] -1 0       0xf5000000 - 0xf5000fff (0x1000) MX[B]
        [13] -1 0       0x80084000 - 0x80085fff (0x2000) MX[B]
        [14] 0  0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [15] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [16] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [17] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [18] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]
        [19] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B]
        [20] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/libint10.a
(--) NV(0): Chipset: "GeForce4 440 Go 64M"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0x94000000
(--) NV(0): MMIO registers at 0x91000000
(--) NV(0): On a laptop.  Assuming Digital Flat Panel
(II) NV(0): Detected CRTC controller 1 being used
(--) NV(0): VideoRAM: 32768 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): LCD: Using hsync range of 28.00-49.00 kHz
(II) NV(0): LCD: Using vrefresh range of 43.00-72.00 Hz
(II) NV(0): Clock range:  12.00 to 350.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "832x624" (hsync out of range)
(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1024" (hsync out of range)
(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x768" (width too large for virtual size)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync 
-vsync
(**) NV(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(==) NV(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.0.0
        ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 1.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.2.99.901, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0   0       0xf1000000 - 0xf107ffff (0x80000) MX[B]
        [1] 0   0       0x94000000 - 0x97ffffff (0x4000000) MX[B]
        [2] 0   0       0x91000000 - 0x91ffffff (0x1000000) MX[B]
        [3] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [4] -1  0       0x00000000 - 0x00000000 (0x1) MX[B]
        [5] -1  0       0xf5200000 - 0xf53fffff (0x200000) MX[B]
        [6] -1  0       0xf5004000 - 0xf5007fff (0x4000) MX[B]
        [7] -1  0       0x80080000 - 0x80080fff (0x1000) MX[B]
        [8] -1  0       0x80081000 - 0x80081fff (0x1000) MX[B]
        [9] -1  0       0x80082000 - 0x80082fff (0x1000) MX[B]
        [10] -1 0       0x80000000 - 0x8007ffff (0x80000) MX[B]
        [11] -1 0       0x90000000 - 0x9001ffff (0x20000) MX[B](B)
        [12] -1 0       0xf1000000 - 0xf107ffff (0x80000) MX[B](B)
        [13] -1 0       0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
        [14] -1 0       0x91000000 - 0x91ffffff (0x1000000) MX[B](B)
        [15] -1 0       0xf5000000 - 0xf5000fff (0x1000) MX[B]
        [16] -1 0       0x80084000 - 0x80085fff (0x2000) MX[B]
        [17] 0  0       0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
        [18] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
        [19] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
        [20] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [21] -1 0       0x00000000 - 0x00000000 (0x1) IX[B]
        [22] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [23] 0  0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Server_Terminate keybinding not found
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element unix/:7100, removing from list!
(II) Open APM successful
(II) Configured Mouse: ps2EnableDataReporting: succeeded
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
        FontPath        "unix/:7100"                    # local font server
        # if the local font server has problems, we can fall back on these
        FontPath        "/usr/lib/X11/fonts/misc"
        FontPath        "/usr/lib/X11/fonts/cyrillic"
        FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/Type1"
        FontPath        "/usr/lib/X11/fonts/Speedo"
        FontPath        "/usr/lib/X11/fonts/100dpi"
        FontPath        "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
        Load    "GLcore"
        Load    "bitmap"
        Load    "dbe"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "record"
        Load    "speedo"
        Load    "type1"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "keyboard"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xfree86"
        Option          "XkbModel"      "macintosh"
        Option          "XkbLayout"     "de"
        Option          "XkbVariant"    "nodeadkeys"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "Emulate3Buttons"       "true"
        Option          "ZAxisMapping"          "4 5"
EndSection

Section "Device"
        Identifier      "NVidia Geforce4 440 Go"
        Driver          "nv"
EndSection

Section "Monitor"
        Identifier      "LCD"
        HorizSync       28-49
        VertRefresh     43-72
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "NVidia Geforce4 440 Go"
        Monitor         "LCD"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1024x768"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1024x768"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1024x768"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1024x768"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1024x768"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1024x768"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
EndSection

Section "DRI"
        Mode    0666
EndSection

### END DEBCONF SECTION

Reply via email to