On 6/13/06, Barry Scott <[EMAIL PROTECTED]> wrote:
Tim Roberts wrote:
> Barry Scott wrote:
>
>
>> Using the Xfree86 4.6.0 i810 driver I'm seeing a problem with sync
>> polarity setting.
>>
>> This modeline is required for 1280x768 mode:
>>
>> Modeline "1280x768" 79.30 1280 1335 1473 1665 768 769 772 793
>> -hsync +vsync
>>
>> But the syncs, as shown on an oscilloscope are +hsync +vsync.
>>
>
>
> Does this matter any more? I thought the relevance of sync polarity
> ended in the middle of the Clinton administration.
>
Good question. We note that the EDID data wants these sync polarities.
Does the monitor use the pulse widths or the polarity to tell one mode
from another? We think that the polarity is used, but we are far from
certain.
>> Looking at the VBE code it seems that as long as the Flags are
>> defined correctly by the driver then its down to the INT10 BIOS
>> to set the syncs on the hardware.
>>
>> Do you think this is a BIOS bug or a driver bug?
>>
>
>
> It may be an expectations bug. As you note, the Intel driver, like the
> Savage driver, relies on the BIOS to set the mode. The BIOS has a
> limited set of video modes, with canned parameters for each timing. It
> is not infinitely variable. If the BIOS thinks 1280x768 should have
> positive syncs, then you are going to get positive syncs
I'm using 915resolution to add 1280x768 and 1360x768 into the BIOS.
It seems that if there is an entry in the BIOS for 1280x768 then the driver
is happy to to call INT10 to pass in the timings and sync polarity data.
If as you say the BIOS timings are the only ones used then what is the point
of the INT10 call to pass in the timings?
I'm not familiar with the i810's bios interface, but no other chip
I've ever worked on has allowed me to specify exact timings via the
BIOS. It's usually either a VESA mode number or a size and a refresh
rate. I doubt the i810 is much different, especially since most i810
bioses don't even support modes like 1280x768 out of the box.
Alex
Barry
_______________________________________________
Devel mailing list
Devel@XFree86.Org
http://XFree86.Org/mailman/listinfo/devel
