RE: [development-axapta] Re: Warehouses in Master Planing

[Yifat Halili]

Thanks for your time so far. You are could be right, that code is worth having a looking.     ______________________________________ Yifat Halili Financial Systems Consultant Exordia - a division of PricewaterhouseCoopers SA Mobile: +27 (82) 355-4011 Tel:      +27 (11) 797-4768 Fax:     +27 (11) 209-4768 Website: www.exordia.co.za From: Harry Nilsen [mailto:[EMAIL PROTECTED] Sent: 19 April 2004 02:55 To: [EMAIL PROTECTED] Subject: RE: [development-axapta] Re: Warehouses in Master Planing   Yes, I mean that warehouse on BOM-lines is used in master planning. Without looking further I'm afraid that your "friend" from Technet might be right. But if I were you I would check on what parameters that makes it right when you create a manual production, and if possible "steal" some code from there. Sorry, but I don't have the time to go deeper into the problem right now, but the problem is very interesting so maybe later.. -----Original Message----- From: yifath1 [mailto:[EMAIL PROTECTED] Sent: 19. april 2004 14:03 To: [EMAIL PROTECTED] Subject: [development-axapta] Re: Warehouses in Master Planing Do you mean the warehouse on the BOM lines? If so, i have to leave this blank because there is no default picking location for the raw materials. The problem is that i have independent warehouses that produce and purchase material, and have the same BOMs... therefore i cannot have a default warehouse on the BOM lines. Just to re-iterate the problem: I have a BOM (called BOM A), that is produced in two different warehouses and each warehouse has its own stock room which it purchases stock into and it picks this stock for production (ie the warehouses are not refilled by a (common main warehouse) How would I set it up that when there is a demand in Warehouse 1 and Warehouse 2, that Master planning would suggest that I need to PURCHASE stock into warehouse 1 to be picked for production in warehouse 1, and at the same time that I need to purchase stock into warehouse 2 to be picked and produced at warehouse 2. Currently, Master planning suggests in which warehouse the production is required, but not the purchase orders. (Axpata suggests in which warehouse the production should occur, the picking list has no warehouse attached to it.) Currently when creating the BOM I have left the warehouse field blank, however the planned orders also have a blank warehouse and hence I don't know where the items must be purchased into.. According to a person who replied to be me on Technet (discussion 9196), i have to modify axapta... the problem is that i have no idea where to start....please can someone help me... Many thanks in advance. Yifat --- In [EMAIL PROTECTED], "Harry Nilsen" <[EMAIL PROTECTED]> wrote: > And do you have an InventLocationId in BOM ? > > -----Original Message----- > From: yifath1 [mailto:[EMAIL PROTECTED] > Sent: 19. april 2004 12:44 > To: [EMAIL PROTECTED] > Subject: [development-axapta] Re: Warehouses in Master Planing > > Yes we do... > thanks > Yifat > > > --- In [EMAIL PROTECTED], "Harry Nilsen" <[EMAIL PROTECTED]> > wrote: > > Do you have 'PlanningPerInventDimension' marked on the Inventory > Dimension Group that the raw materials are belonging to ? > > > > -----Original Message----- > > From: yifath1 [mailto:[EMAIL PROTECTED] > > Sent: 19. april 2004 08:40 > > To: [EMAIL PROTECTED] > > Subject: [development-axapta] Re: Warehouses in Master Planing > > > > Hi there, > > > > The problem occurs when you run the master scheduling, it > populates > > the warehouse for the production order, but it does not populate > the > > warehouse for the raw material. For our solution to work (for our > > client) we need to be able to run master planning... there is no > > problem when creating manual production, but this is not the an > > option at the moment. > > > > Thanks > > Yifat > > > > > > --- In [EMAIL PROTECTED], "Theissen, Annette" > > <[EMAIL PROTECTED]> wrote: > > > Does your problem only occur when creating a Production from > > MasterPlan but > > > not when creating a Production directly? > > >  > > > > > > -----Ursprüngliche Nachricht----- > > > Von: mud_mullet [mailto:[EMAIL PROTECTED] > > > Gesendet: Freitag, 16. April 2004 16:24 > > > An: [EMAIL PROTECTED] > > > Betreff: [development-axapta] Re: Warehouses in Master Planing > > > > > > > > > I looked at her Discussion And your reply but i am pritty sure > > that > > > the changes are not made on the Table they need to be Made in > one > > of > > > the classes that are used Maybe the reqcalc Class but im not > sure > > > where > > > --- In [EMAIL PROTECTED], "Theissen, Annette" > > > <[EMAIL PROTECTED]> wrote: > > > > Hi Jason, > > > >  > > > > seems like you're working on the same as Yifat does. Why don't > > you > > > have a > > > > look at the mails titled "Produce the same BOM in 2 > independent > > > warehouses". > > > >  > > > > Bye, Annette > > > >  > > > > > > > > Mit freundlichen Grüßen / Best regards > > > > Dipl. Phys. Annette Theißen > > > > System Software Entwicklung > > > > ______________________________________________ > > > > Viscom AG - Carl-Buderus-Str. 9-15 - D-30455 Hannover > > > > Phone: +49/511/94996-0 - Fax: +49/511/94996-900 > > > > mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>  - > > > > http://www.viscom.de <http://www.viscom.de>  < > > http://www.viscom.de/ > > > <http://www.viscom.de/> >  > > > > > > > > -----Ursprüngliche Nachricht----- > > > > Von: mud_mullet [mailto:[EMAIL PROTECTED] > > > > Gesendet: Freitag, 16. April 2004 15:24 > > > > An: [EMAIL PROTECTED] > > > > Betreff: [development-axapta] Warehouses in Master Planing > > > > > > > > > > > > Hi all > > > > > > > > I have independent warehouses that really produce, purchase > and > > > sell > > > > items. However, the item master and bills are shared between > the > > > > warehouses i.e. item Z is manufactured in all warehouses with > > > > components that sit in the warehouse where it is produced. > > > > > > > > Once i create demand for the same item to be produced in > > warehouse > > > 1 > > > > and warehouse 2, i run master planning which creates > production > > > and > > > > purchases orders for the correct items. However, the warehouse > > for > > > > the components of the the BOM is not populated. > > > > > > > > > > > > Any Help would be Greatly Appreciated > > > > Thanks in Advance > > > > Jason > > > > > > > > > > > > > > > >   _____  > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > *      To visit your group on the web, go to: > > > > http://groups.yahoo.com/group/development-axapta/ > > > <http://groups.yahoo.com/group/development-axapta/> > > > > < http://groups.yahoo.com/group/development-axapta/ > > > <http://groups.yahoo.com/group/development-axapta/> > > > > >   > > > > > > > > *      To unsubscribe from this group, send an email to: > > > > [EMAIL PROTECTED] > > > > <mailto:[EMAIL PROTECTED] > > > subject=Unsubscribe> > > > >   > > > > > > > > *      Your use of Yahoo! Groups is subject to the Yahoo! > Terms > > of > > > Service > > > > < http://docs.yahoo.com/info/terms/ > > <http://docs.yahoo.com/info/terms/> > > > > . > > > > > > > > > > > >   _____  > > > > > > Yahoo! Groups Links > > > > > > > > > *      To visit your group on the web, go to: > > > http://groups.yahoo.com/group/development-axapta/ > > > <http://groups.yahoo.com/group/development-axapta/> > > >   > > > > > > *      To unsubscribe from this group, send an email to: > > > [EMAIL PROTECTED] > > > <mailto:[EMAIL PROTECTED] > > subject=Unsubscribe> > > >   > > > > > > *      Your use of Yahoo! Groups is subject to the Yahoo! Terms of > > Service > > > <http://docs.yahoo.com/info/terms/> . > > > > > > > > > >  > > Yahoo! Groups Links > > > > >  > Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/development-axapta/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.