You could change the System variable INDEX to value 64, which should, according to training materials, make RecIds unique not within company, but within Company + Table

      -----Original Message-----
      From: Richard van der Craats [mailto:[EMAIL PROTECTED]
      Sent: Wednesday, June 02, 2004 2:29 PM
      To: [EMAIL PROTECTED]
      Subject: RE: [development-axapta] Negative RedIds & Custtable
     
     
      Hi Kim,
     
      So if I understand this correctly... if you would use every RecID
      available, and have no unused RecIDs left, axapta would be practically
      useless?
     
      Regards,
      Richard van der Craats
     
     
      >
      > Hi Tomasz
      >
      >
      >
      > As everybody knows we have 4.2 billion recids per company to deal with. 2
      > billions above zero and 2 billions below. After these recids are used
      > Axapta actually stops...
      >
      > The problem is that we are using more recids than we use. We waste a lot
      > of recids, because we draw a number of recids from SystemSequences every
      > time we are going to insert some records. I have seen a lot of
      > installations were the recids was used, because they had imported and
      > delete a lot of records.
      >
      >
      >
      > What you have to do is to run the
      >
      >
      >
      > AOT/Classes/SysRecidRepair
      >
      >
      >
      > But only use the version 3.0 Sp2 - sp3 and in version 2.5 SP4. The class
      > will free up unused recids and reorganize your recids.
      >
      > Med venlig hilsen / Best regards
      >
      > Kim Truelsen
      > Escalation Engineer
      > Microsoft Business Solutions Axapta
      > EMEA Global Technical Support Center
      >
      > Direct / mobile: +45 4489 0100 / +45 29499958
      > E-mail: [EMAIL PROTECTED]
      > >;BLOCKED::mailto:[EMAIL PROTECTED];BLOCKED::http://www.microsoft.com/support;BLOCKED::http://www.microsoft.com/BusinessSolutions/PartnerSource/default.mspx;BLOCKED::http://www.microsoft.com/protect;BLOCKED::http://www.microsoft.dk/;BLOCKED::mailto:[EMAIL PROTECTED];[EMAIL PROTECTED];[EMAIL PROTECTED];http://rd.yahoo.com/SIG=1291kfl4s/M=295196.4901138.6071305.3001176/D=groups/S=1705006764:HM/EXP=1086259050/A=2128215/R=0/SIG=10se96mf6/*http:/companion.yahoo.com;http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=:HM/A=2128215/rand=897756411
     
     
     
Yahoo! Groups Sponsor     
ADVERTISEMENT
click here <http://rd.yahoo.com/SIG=129vig26g/M=295196.4901138.6071305.3001176/D=groups/S=1705006764:HM/EXP=1086267392/A=2128215/R=0/SIG=10se96mf6/*http://companion.yahoo.com>      
<http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=:HM/A=2128215/rand=620693438>      

     
  _____ 

      Yahoo! Groups Links
     

      *      To visit your group on the web, go to:
            http://groups.yahoo.com/group/development-axapta/
             
      *      To unsubscribe from this group, send an email to:
            [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
             
      *      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links

Reply via email to