Hi Chris, > I just ran into another problem - it seems that my Fonero 2.0N suddenly > broke down. > It worked just great even as VPN access point, and now there is not a > single LED lid any more. Hmm, that sounds like hardware failure... I don't think you can screw up the software so badly it prevents all leds from lighting up.
> I have not yet sorted out whether this issue is related to the power supply > or the router, but I rather guess the latter one since both grow warm when > connected to power. In my experience, a faulty power supply often causes erratic behaviour (Fonera not booting but lighting up random leds, for example). Still, it would be worthwile to try a different power supply (perhaps you have one of those universal power supplies lying around?). It should be a 12V supply with the positive terminal inside the plug and the negative terminal on the outside. > Do I have any warranty left on this device (I guess I bought it in > late 2009 but did barely use it until now)? Since the fonrero 2.0N is > not offered through the German Fon store at present, is there any way > to obtain a replacement device at all? I'm not sure how warranty works, but I think it's best to contact [email protected] about this, explaining the situation. Be sure to include the MAC address of your router and FON account name (e-mail) as well. > I attached the full buil.log from the shell output (make v=99 &>build.log, > presuming this is what you where asking for). This is what I was looking for. The list of packages installed seems very short and limited to openwrt packages. Did you run ./install.sh after making the checkout? Gr. Matthijs
signature.asc
Description: Digital signature
_______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
