- Update from version 3.2.6 to 3.2.7
- Update of rootfile
- Changelog
3.2.7
Feature Improvements
Print MD5 hash of the configuration files in debug mode This helps
people
track configuration changes.
Add support for IPv6 to "abinary" type. The fields are the same as
for
"ip", but use "ipv6", and IPv6 formatted addresses.
Update radclient to make it clear that Message-Authenticator is
added to
all Access-Request packets, even if the input file does not
contain it.
Add support for Subject AltName URI. Closes #5450.
Add python_path_mode option to python3 module.
Relax checks on OpenSSL minor versions for OpenSSL 3.x.
Add API for deleting dynamic home servers.
set SO_KEEPALIVE on outbound sockets, so firewalls are less likly
to close
TCP connections.
Allow querying of statistics when home_server has src_ipaddr set.
See
FreeRADIUS-Stats-Server-Src-IP-Address Fixes #5483.
Update dictionary "man" page. Fixes #4346.
Change jlibtool to use --show-config, to avoid conflicts with clang
--config. Fixes #5442.
RADIUS/TLS clients now support a "tls' subsection. For connections
from
this client, this section is used in preference to the "listen" TLS
settings. This allows a server to easily present different
identities to
different clients.
RADIUS/TLS has been updated for TLS-PSK and TLS 1.3. Tested with
radsecproxy.
Bug Fixes
For EAP-TLS, send TLS start without a length field Some clients
refuse to
do EAP-TLS when this field exists.
Avoid blocking TLS sockets on corner cases during session setup.
Update home server stats.
Correct error message about untrusted certs. Fixes #5466.
Use PyEval_RestoreThread to swap to main thread Fixes #5111.
Don't run Python detach function on config check.
Fix a number of issues with TLS connections and
"check_client_connections = yes".
Be more careful about managing the incoming queue when databases
block the
server. The server will still be unable to make progress, but it
should
crash less. Whether or not this is a good thing is unknown.
Better handler single-character expansions. Fixes #2216.
Correct calculation of EAP length in pre-proxy. Fixes #5486.
Don't segfault when using detail listeners. Fixes #5485.
Add check for Couchbase v2, rlm_couchbase won't build on v3.
Signed-off-by: Adolf Belka <[email protected]>
---
config/rootfiles/packages/freeradius | 6 ++++++
lfs/freeradius | 6 +++---
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/config/rootfiles/packages/freeradius
b/config/rootfiles/packages/freeradius
index 3a82e7d9c..d69783b4f 100644
--- a/config/rootfiles/packages/freeradius
+++ b/config/rootfiles/packages/freeradius
@@ -65,6 +65,7 @@ etc/raddb
#etc/raddb/mods-available/passwd
#etc/raddb/mods-available/perl
#etc/raddb/mods-available/preprocess
+#etc/raddb/mods-available/proxy_rate_limit
#etc/raddb/mods-available/python
#etc/raddb/mods-available/python3
#etc/raddb/mods-available/radutmp
@@ -259,6 +260,7 @@ etc/raddb
#etc/raddb/mods-enabled/pap
#etc/raddb/mods-enabled/passwd
#etc/raddb/mods-enabled/preprocess
+#etc/raddb/mods-enabled/proxy_rate_limit
#etc/raddb/mods-enabled/radutmp
#etc/raddb/mods-enabled/realm
#etc/raddb/mods-enabled/replicate
@@ -544,6 +546,9 @@ usr/lib/freeradius/rlm_perl.so
#usr/lib/freeradius/rlm_preprocess.a
#usr/lib/freeradius/rlm_preprocess.la
usr/lib/freeradius/rlm_preprocess.so
+#usr/lib/freeradius/rlm_proxy_rate_limit.a
+#usr/lib/freeradius/rlm_proxy_rate_limit.la
+usr/lib/freeradius/rlm_proxy_rate_limit.so
#usr/lib/freeradius/rlm_python3.a
#usr/lib/freeradius/rlm_python3.la
usr/lib/freeradius/rlm_python3.so
@@ -993,6 +998,7 @@ usr/share/freeradius
#usr/share/freeradius/dictionary.hillstone
#usr/share/freeradius/dictionary.hp
#usr/share/freeradius/dictionary.huawei
+#usr/share/freeradius/dictionary.huawei.v2
#usr/share/freeradius/dictionary.iana
#usr/share/freeradius/dictionary.iea
#usr/share/freeradius/dictionary.infinera
diff --git a/lfs/freeradius b/lfs/freeradius
index 4a267485f..716a8e569 100644
--- a/lfs/freeradius
+++ b/lfs/freeradius
@@ -26,7 +26,7 @@ include Config
SUMMARY = RADIUS Server
-VER = 3.2.6
+VER = 3.2.7
THISAPP = freeradius-server-$(VER)
DL_FILE = $(THISAPP).tar.bz2
@@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
TARGET = $(DIR_INFO)/$(THISAPP)
PROG = freeradius
-PAK_VER = 24
+PAK_VER = 25
DEPS = libtalloc samba
@@ -48,7 +48,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 =
0af7cdf7fb784f2d5019f3bcb06d1d44dca046c9a4513d780ab032367001b6a67e9ea17a3a5b4609b9d7b936647e60c96e35188ba9644c4360071ac8d021bd58
+$(DL_FILE)_BLAKE2 =
cd523fbc01e82d87f0944926612223ee2acafc008f0f50447c35263b5dcdd36c8f00c54dde1102a3987b45a7e67426c99a7aee692cf59983c80ead111a2188dd
install : $(TARGET)
--
2.50.0
