- Update from version 11.4.0 to 11.7.0
- Update of rootfile
- Changelog
11.7.0
New features
* Allow setting the log level of Cloud Hypervisor
Users can now configure the verbosity of Cloud Hypervisor by setting
the "log_level" option in ch.conf
* bhyve: experimental NAT networking support
The bhyve driver now has experimental NAT networking support
using the Packet Filter (pf) firewall.
* bhyve: domain statistics reporting
The bhyve driver now supports querying domain block, interface,
and memory statistics. Not all statistics fields are supported
though.
Improvements
* bhyve: improve 'efi' configuration autofill
When a domain is configured with ``<os firmware='efi'/>``, NVRAM
configuration is now autofilled.
11.6.0
New features
* Introduce VIR_CONNECT_BASELINE_CPU_IGNORE_HOST flag
This new flag for virConnectBaselineHypervisorCPU can be used for
computing
a baseline CPU on any host. Without the
VIR_CONNECT_BASELINE_CPU_IGNORE_HOST
flag the baseline API would return reasonable output only when run
on one of
the hosts that the input CPU definitions were collected from.
* Allow control over QEMU TLS priority strings
The qemu.conf file now has multiple settings allowing control over
the
QEMU TLS priority strings, for the different subsystems in QEMU that
can support TLS. This can be used to workaround a current bug in
GNUTLS
that is liable to cause crashes of the source QEMU when performing
long
running live migration operations with TLS enabled.
* Add support for disabling deprecated CPU model features by default
for s390
domains. Starting an s390 domain with host-model will now default to
setting the ``deprecated_features`` attribute to ``off``, ensuring
the
domain starts with a migration-compatible CPU model to newer
systems. This
behavior can be modified by setting the
``default_cpu_deprecated_features``
option in the qemu.conf file.
* bhyve: Add TCP console support
TCP serial devices can now be configured with ``<serial
type='tcp'>``::
<serial type='tcp'>
<source mode='bind' host='127.0.0.1' service='12345'/>
<target type='serial' port='0'/>
</serial>
Additionally, number of supported consoles increased to 4.
* qemu: Add support for RBD namespaces
Allow specifying the 'namespace' within a RBD image pool.
Improvements
* qemu: Change default SCSI controller model to ``virtio-scsi`` for
ARM and
RISC-V The previous default of ``lsilogic`` is unsupported by modern
operating systems. ``virtio-scsi`` is a more suitable default for
ARM and
RISC-V ``virt`` machine types.
* Clarify documentation of virConnectBaselineHypervisorCPU
The documentation makes it clear virConnectBaselineHypervisorCPU is
supposed to be called on one of the hosts represented in the input
CPU
definitions. Otherwise the API will give unexpected results.
* Allow specifying zero discard granularity for block devices
This can be used to tell some guest operating systems (notably
Windows) to
not trim the disk.
* bhyve: Add timeout handling for bhyveload
It is now possible to run ``bhyveload`` with the ``timeout`` tool,
which
can send ``SIGTERM`` and ``SIGKILL`` signals when timeout is
reached.
Timeout values are set using the ``bhyveload_timeout`` and
``bhyveload_timeout_kill`` configuration options in ``bhyve.conf``.
* nss: Improve debugging
Debugging messages from NSS modules can be now enabled by setting
the
``LIBVIRT_NSS_DEBUG`` environment variable. So far, there is no
special
meaning to its value.
* rpc: Removed requirement for TLS certificates to support 'key
encipherment'
With TLS 1.3, key encipherment is not required even for RSA keys.
Other key
types didn't even support it so they were wrongly refused even in
cases when
they would work with libvirt. The TLS certificate validation now no
longer
requires 'key encipherment' to be enabled.
Bug fixes
* bhyve: Fix resetting of the autostart flag of the domain on destroy.
* The nwfilter driver no longer recreates the base iptable/ip6tables
chains
The nwfilter driver had a impl mistake causing it to recreate the
base chains for iptables/ip6tables every time a VM was started.
This allowed a small window where traffic might not be fully
filtered. It now handles iptables/ip6tables the same way as
ebtables, creating the base chains only if they did not already
exist.
* Fix systemd unit ordering for auto-shutdown of domains via the
daemon
The ordering of systemd units created by libvirt for individual
machines
needed to be adapted when the shutdown of VMs on host shutdown is
done
via the virt daemon itself (rather than ``libvirt-guests.service``)
to
ensure that the VMs are not terminated before the virt daemon can
deal with
them.
11.5.0
Removed features
* qemu: Don't accept VIR_DUMP_LIVE flag in
virDomainCoreDumpWithFormat()
Unfortunately, QEMU always pauses vCPUs when doing a core dump.
Therefore,
there is no way for Libvirt to honor VIR_DUMP_LIVE flag semantics.
Instead
of silently pretending the flag works, an appropriate error is now
reported.
New features
* vmx: Add support for reporting NVMe disks in the domain XML
* qemu: Add support for NVMe disks
NVMe disks can now be emulated by using an ``nvme`` bus, but
require a
serial due to the hypervisor::
<target dev='nvme0n1' bus='nvme'/>
<serial>qwertyuiop</serial>
Multiple disks can be represented as different namespaces on the
same
controller, but they cannot have a different serial number due to
the fact
that it is the controller which ultimately has the serial number
attached to
it, but for ease of use it is automatically copied from the disk
serial.
* esx: Add support for specifying alternative CA bundle for remote
peer
verification. Users can now use ``cacert`` parameter in the URI to
specify
a file path with CA certificate(s) that will be used for remote peer
certificate validation.
* qemu: add support for AMD IOMMU device
The ``amd`` model for the ``<iommu>`` device is now supported.
New attributes ``passtrhough`` and ``xtsup`` are also supported for
this
model.
Improvements
* Include supported console types in domain capabilities
Domain capabilities now include information about supported console
types,
such as::
<console supported='yes'>
<enum name='type'>
<value>pty</value>
<value>tcp</value>
</enum>
</console>
* virsh: Add waiting for domain state via ``virsh await``
The new helper command ``virsh await`` simplifies waiting on domain
state
which is normally announced via events. Currently two waiting
conditions are
implemented: ``domain-inactive``, and ``guest-agent-available``.
Bug fixes
* qemu: Be more forgiving when acquiring QUERY job when formatting
domain XML
Since ``libvirt-11.0.0`` the ``virDomainGetXMLDesc()`` API used to
format
domain XML acquires QUERY job. But this caused a regression when
the API
might timeout for incoming migration. This is now fixed.
* qemu: Fix shared filesystem detection on nonexistent paths
Since ``libvirt-11.1.0`` nonexistent paths within directories
marked as
shared filesystem (via the ``shared_filesystems`` option in
``qemu.conf``
would not be properly detected as being on a shared filesystem.
* qemu: Properly emulate USB cdrom device
CD-ROM devices on USB bus are now properly emulated as such which
was not
the case since libvirt switched to the modern qemu commandline
syntax for
storage backends.
Signed-off-by: Adolf Belka <[email protected]>
---
config/rootfiles/packages/libvirt | 13 ++++--
lfs/libvirt | 66 +++++++++++++++----------------
2 files changed, 41 insertions(+), 38 deletions(-)
diff --git a/config/rootfiles/packages/libvirt
b/config/rootfiles/packages/libvirt
index d265125b0..718debf7e 100644
--- a/config/rootfiles/packages/libvirt
+++ b/config/rootfiles/packages/libvirt
@@ -1,4 +1,5 @@
#etc/libvirt
+etc/libvirt/ch.conf
etc/libvirt/libvirt-admin.conf
etc/libvirt/libvirt.conf
etc/libvirt/libvirtd.conf
@@ -87,16 +88,16 @@ usr/bin/virt-xml-validate
#usr/lib/libvirt
#usr/lib/libvirt-admin.so
usr/lib/libvirt-admin.so.0
-usr/lib/libvirt-admin.so.0.11004.0
+usr/lib/libvirt-admin.so.0.11007.0
#usr/lib/libvirt-lxc.so
usr/lib/libvirt-lxc.so.0
-usr/lib/libvirt-lxc.so.0.11004.0
+usr/lib/libvirt-lxc.so.0.11007.0
#usr/lib/libvirt-qemu.so
usr/lib/libvirt-qemu.so.0
-usr/lib/libvirt-qemu.so.0.11004.0
+usr/lib/libvirt-qemu.so.0.11007.0
#usr/lib/libvirt.so
usr/lib/libvirt.so.0
-usr/lib/libvirt.so.0.11004.0
+usr/lib/libvirt.so.0.11007.0
#usr/lib/libvirt/connection-driver
usr/lib/libvirt/connection-driver/libvirt_driver_ch.so
usr/lib/libvirt/connection-driver/libvirt_driver_interface.so
@@ -141,10 +142,12 @@ usr/sbin/virtstoraged
#usr/share/augeas/lenses
#usr/share/augeas/lenses/libvirt_lockd.aug
#usr/share/augeas/lenses/libvirtd.aug
+#usr/share/augeas/lenses/libvirtd_ch.aug
#usr/share/augeas/lenses/libvirtd_qemu.aug
#usr/share/augeas/lenses/tests
#usr/share/augeas/lenses/tests/test_libvirt_lockd.aug
#usr/share/augeas/lenses/tests/test_libvirtd.aug
+#usr/share/augeas/lenses/tests/test_libvirtd_ch.aug
#usr/share/augeas/lenses/tests/test_libvirtd_qemu.aug
#usr/share/augeas/lenses/tests/test_virtchd.aug
#usr/share/augeas/lenses/tests/test_virtinterfaced.aug
@@ -426,6 +429,8 @@ usr/share/libvirt/schemas/storagecommon.rng
usr/share/libvirt/schemas/storagepool.rng
usr/share/libvirt/schemas/storagepoolcaps.rng
usr/share/libvirt/schemas/storagevol.rng
+#usr/share/libvirt/schemas/sysinfo.rng
+#usr/share/libvirt/schemas/sysinfocommon.rng
#usr/share/libvirt/test-screenshot.png
#usr/share/locale/as/LC_MESSAGES/libvirt.mo
#usr/share/locale/bg/LC_MESSAGES/libvirt.mo
diff --git a/lfs/libvirt b/lfs/libvirt
index dc8e0aa99..90e5a4696 100644
--- a/lfs/libvirt
+++ b/lfs/libvirt
@@ -26,7 +26,7 @@ include Config
SUMMARY = Server side daemon and supporting files for libvirt
-VER = 11.4.0
+VER = 11.7.0
THISAPP = libvirt-$(VER)
DL_FILE = $(THISAPP).tar.xz
@@ -35,7 +35,7 @@ DIR_APP = $(DIR_SRC)/$(THISAPP)
TARGET = $(DIR_INFO)/$(THISAPP)
SUP_ARCH = x86_64 aarch64
PROG = libvirt
-PAK_VER = 41
+PAK_VER = 42
DEPS = ebtables libpciaccess ovmf swtpm qemu
@@ -49,7 +49,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 =
54d2b9cb35394184d2ce22670623849ecfb54abd1c8e48135ec735ed6b30fa9fa22261cf847a66269a0f3918f164954fcc0a5d7eec1e0d759831925f3ac6b546
+$(DL_FILE)_BLAKE2 =
44b4c2a2c498d351762cf2bcbd26460dbe663e08e3f2a1b6e73fefbcb4bbc4e77f4b0d47ad771ec7b3854a9b2ebdbf08162590d20bd080f276a8042148ca5f07
install : $(TARGET)
check : $(patsubst %,$(DIR_CHK)/%,$(objects))
@@ -81,39 +81,37 @@ $(subst %,%_BLAKE2,$(objects)) :
$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
@$(PREBUILD)
@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar Jxf $(DIR_DL)/$(DL_FILE)
-
cd $(DIR_APP) && patch -Np1 -i
$(DIR_SRC)/src/patches/libvirt/0001-Change-default-behavior-of-libvirt-guests.sh-for-IPF.patch
-
cd $(DIR_APP) && meson \
- --prefix=/usr \
- --localstatedir=/var \
- --sysconfdir=/etc \
- -D docs=disabled \
- -D sasl=disabled \
- -D driver_vbox=disabled \
- -D driver_lxc=disabled \
- -D driver_esx=disabled \
- -D driver_vmware=disabled \
- -D driver_openvz=disabled \
- -D firewalld=disabled \
- -D driver_network=disabled \
- -D driver_interface=enabled \
- -D wireshark_dissector=disabled \
- -D nls=disabled \
- -D tests=disabled \
- -D qemu_user=nobody \
- -D qemu_group=kvm \
- -D storage_dir=enabled \
- -D storage_fs=enabled \
- -D storage_lvm=enabled \
- -D storage_iscsi=disabled \
- -D storage_scsi=disabled \
- -D storage_mpath=disabled \
- -D storage_disk=disabled \
- -D storage_rbd=disabled \
- -D storage_gluster=disabled \
- -D storage_zfs=disabled \
- builddir/
+ --prefix=/usr \
+ --localstatedir=/var \
+ --sysconfdir=/etc \
+ -D docs=disabled \
+ -D sasl=disabled \
+ -D driver_vbox=disabled \
+ -D driver_lxc=disabled \
+ -D driver_esx=disabled \
+ -D driver_vmware=disabled \
+ -D driver_openvz=disabled \
+ -D firewalld=disabled \
+ -D driver_network=disabled \
+ -D driver_interface=enabled \
+ -D wireshark_dissector=disabled \
+ -D nls=disabled \
+ -D tests=disabled \
+ -D qemu_user=nobody \
+ -D qemu_group=kvm \
+ -D storage_dir=enabled \
+ -D storage_fs=enabled \
+ -D storage_lvm=enabled \
+ -D storage_iscsi=disabled \
+ -D storage_scsi=disabled \
+ -D storage_mpath=disabled \
+ -D storage_disk=disabled \
+ -D storage_rbd=disabled \
+ -D storage_gluster=disabled \
+ -D storage_zfs=disabled \
+ builddir/
cd $(DIR_APP) && ninja -C builddir/ $(MAKETUNING) $(EXTRA_MAKE)
cd $(DIR_APP) && ninja -C builddir/ install
--
2.51.0
