I wrote >Im having a similar issue, but a bit farther off the beaten path. Im on VS2008, but trying to cross compile for Wince.
Found the issue. The problem was the parameters for syncqt. The link Rohan posted had stuff like: Project MESSAGE: c:\test\recipes\187508955\base\qtbase\bin\syncqt.bat -qtdir C:\test\recipes\187508955\base\qtbase -module-fwd C:\test\recipes\187508955\base\qtbase/mkspecs/modules -developer-build -generator MSBUILD -outdir C:/test/recipes/187508955/base/qtjsbackend C:/test/recipes/187508955/base/qtjsbackend Mine had: Project MESSAGE: c:\_Qt5\jnk\qtbase\bin\syncqt.bat -module-fwd C:/_Qt5/jnk/qtjsbackend/module-paths/modules -cache-module-fwd -generator MSVC.NET -outdir C:/_Qt5/jnk/qtjsbackend C:/_Qt5/src/qtjsbackend Of note, the -qtdir parameter isn't set, so the .pri "modules" were being put in a module-paths folder under each subdirectory, rather than in qtbase/mkspecs/modules. Setting QTDIR to the qtbase of my shadow build dir fixed the problem. I also found the tips from the following blog helpful: http://www.digia.com/en/Blogs/Qt-blog/Andy-Shaw/Dates/2011/11/Qt-Commercial- Support-Weekly-2-Debugging-qmake-Problems/ _______________________________________________ Development mailing list Development@qt-project.org http://lists.qt-project.org/mailman/listinfo/development
