Worked as advertised for me: ifconfig usb0 192.168.0.200 netmask 255.255.255.0 ssh [EMAIL PROTECTED] [just hit enter when prompted for a password]
On 7/31/07, andrej w. <[EMAIL PROTECTED]> wrote: > Hi, > > i think it is irrelevant when to fire up the dfu-util, as long as you > changed the state of the > console input (that is "Set console to USB"), right? > Did anybody managed to gain remote ssh access to the unit? I am > constantly getting "connection refused" > errors, while trying. Btw. I have used yesterdays rootfs and kernel > images (2007_07_30). > > awu > > Peter Trapp schrieb: > > On Monday 30 July 2007 01:19, Bobby Edmonds wrote: > > > >> I cannot get my unit into DFU Mode. > >> > >> When I get the boot menu if I do a "dfu-util -l" I get the following > >> (Runtime Mode): > >> > >> dfu-util - (C) 2007 by OpenMoko Inc. > >> This program is Free Software and has ABSOLUTELY NO WARRANTY > >> > >> Found DFU Runtime: [0x1457:0x5119] devnum=18, cfg=0, intf=2, alt=0, > >> name="USB Device Firmware Upgrade" > >> > >> If I select "Set console to USB" it briefly displays another screen that > >> says "Press [AUX] to return to boot menu" and then rolls back to the > >> boot menu. > >> > >> > > > > I guess you've already done it, so for all others... > > > > I figured out the same :) My workaround is quite easy. > > > > 1) prepare everything at the host side (including the ./dfu-util ) > > 2) "Set console to USB" and press "power" > > 3) asap Neo changes to "Press [AUX] to return to boot menu" fire the > > dfu-util > > command on host side > > > > Note: Neo switches back to the "boot-menu" but as long as the host doesn't > > tell you anything different it should work :) > > > > -homyx > > > > > > > > >
