I've been working with this script but not had acceptable results. If I download the provided System_boot.png, I can convert it with the script quite easily, and I can program it to the phone using dfu-util as well. If I make a minor change, such as painting a line along the image (using Photoshop), it converts and downloads fine and I can see the change.
The problem I've had... if I paste an image into this graphic (to overlay a logo), the image displayed by the phone is corrupted from the point of approximately the middle of the logo, extending to the bottom of the screen. That is, the top half of whatever I paste is displayed properly, but the entire bottom of the screen, starting from about the midpoint of my pasting, is noise. I've been able to repeat this with every attempt, and I've tried the same thing using gimp rather than Photoshop (to the same results). -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Piotr Duda Sent: Tuesday, August 21, 2007 5:27 PM To: Dr. H. Nikolaus Schaller Cc: [email protected] Subject: Re: Splash Screen? check this out: http://svn.openmoko.org/trunk/src/host/splash/ U find there README file and simple script to generate splash file, but I had no time to experiment with it yet... If U have time to try it, please put some info on wiki :-) Piotr Dr. H. Nikolaus Schaller pisze: > dfu-util allows to write a Splash screen file - but info about formats > is rare. > > http://lists.openmoko.org/pipermail/openmoko-uboot/2007-February/000005. html > > > says it is a gzipped raw image (whatever this means in detail). > > Did anybody experiment with the Splash screen? > > -- hns > > > > NOTE: The information in this message is intended for the personal and confidential use of the designated recipient(s) named above. To the extent the recipient(s) is/are bound by a non-disclosure agreement, or other agreement that contains an obligation of confidentiality, with AuthenTec, then this message and/or any attachments shall be considered confidential information and subject to the confidentiality terms of that agreement. If the reader of this message is not the intended recipient named above, you are notified that you have received this document in error, and any review, dissemination, distribution or copying of this message is strictly prohibited. If you have received this document in error, please delete the original message and notify the sender immediately. Thank you. AuthenTec, Inc. http://www.authentec.com
