Hi, I have been able to make calls manually using the instructions in the wiki - http://wiki.openmoko.org/wiki/Manually_using_GSM The only oddity was, as the author notes, I did have to power cycle the GSM module to get the prompt - "AT-Command Interpreter Ready"
After successfully testing the GSM manually, I started the gsmd and tried using the openmoko-dialer in vain. The /tmp/gsm.log file contains the lines attached to the end of this email. I also find that the applet of top menu disappears whenever I power on the GSM module using the pull-down menu. Any hints for debugging or fixing this trouble would be appreciated. thanks, zak Thu Jan 1 00:33:17 1970 <1> atcmd.c:415:ml_parse() Clearing mlbuf Thu Jan 1 00:35:09 1970 <1> atcmd.c:210:ml_parse() buf=`%CSQ: 19, 99, 2'(16) Thu Jan 1 00:35:09 1970 <1> atcmd.c:278:ml_parse() extd reply `%CSQ: 19, 99, 2' to cmd `NONE', must be unsolicited Thu Jan 1 00:35:09 1970 <1> vendor_ti.c:78:csq_parse() entering csq_parse param=` 19, 99, 2' Thu Jan 1 00:35:09 1970 <1> unsolicited.c:69:usock_evt_send() entering evt=6
