On 10/27/07, ttz <[EMAIL PROTECTED]> wrote: > > On 20/10/07 05:04 -0500, ttz wrote: > > Since I got my P1 a week ago, I had had trouble to get the SD card mounted. > > I tried with the following builds: > > > > OpenMoko-openmoko-devel-image-glibc-ipk-P1-September-Snapshot-20070916-fic-gta01.rootfs.jffs2 > > uImage-2.6.22.5-moko11+svnr2937-r0-fic-gta01.bin > > > > and > > > > uImage-2.6.22.5-moko11+svnr2937-r3-neo1973.bin > > scaredycat-openmoko-devel-image-fic-gta01.jffs2 > > > > also with my own builds and couple older ones. All kernel boots were > > fine but none of them gave me the device /dev/mmcblk0p1, thus > > I never got the SD card mounted. > > > > The dmesg shows there are I/O errors: > > > > [EMAIL PROTECTED]:~$ dmesg | grep mmc > > <7>mmc_set_power(power_mode=0, vdd=0 > > ... > > <7>mmc_set_power(power_mode=2, vdd=20 > > <6>mmcblk0: mmc0:e624 SU512 495488KiB > > <6> mmcblk0:<3>mmcblk0: error 1 transferring data > > <4>end_request: I/O error, dev mmcblk0, sector 0 > > <3>Buffer I/O error on device mmcblk0, logical block 0 > > <3>mmcblk0: error 1 transferring data > > <4>end_request: I/O error, dev mmcblk0, sector 0 > > > > GTA01Bv4 # mmcinit > > trying to detect SD Card... > > Manufacturer: 0x03, OEM "SD" > > Product name: "SU512", revision 8.0 > > Serial number: 281088817 > > Manufacturing date: 8/2007 > > CRC: 0x21, b0 = 1 > > READ_BL_LEN=15, C_SIZE_MULT=7, C_SIZE=3453 > > size = 2329935872 > > mmc_block_read: err SDIDSTA=0x00000024 > > GTA01Bv4 # > > > > GTA01Bv4 # ext2ls mmc 0 > > mmc_block_read: err SDIDSTA=0x00000024 > > bad MBR sector signature 0xfd33 > > ** Bad partition - mmc 0:1 ** > > GTA01Bv4 # > > > > So it looks like there is block read error. I don't think my cards > > are bad, so I kind of suspect that I may have a bad disk controller. > > > > Any idea on this? Who should I talk to at FIC about the possible > > hw defect? > > > > Thanks! > > > > Tom
> Seems everyone else has no problem with the SD card but me. I thought > to upgrade with the latest uboot. I tried few more images and latest > images bundle I tried is the following: > > - > u-boot-gta01bv4-1.2.0+git3e66c078003607a7d1d214c15a5f262bc1b4032f+svn20070829-r2.bin > - uImage-2.6.22.5-moko11+svnr2937-r3-neo1973.bin > - > OpenMoko-scaredycat-openmoko-devel-image-glibc-ipk-P1-Snapshot-20071021-fic-gta01.rootfs.jffs2 > > doesn't seem to change anything as I still got the mmc I/O error with > the two SD cards come with my Adv set as well as another SD card of my own. > All of the three cards can be read and written with no problem on other > machines(linux and windows). This gets kind frustrating. > > Thanks! > > Tom > > Is that card inserted right? It's not obvious but the card holder actually slides and locks in place. Have you done this properly? -Nick
