Bonjour, Krzysztof Kajkowski <[EMAIL PROTECTED]> a écrit :
> > Wiadomo=B6=E6 napisana w dniu Nov 28, 2007, o godz 2:12 PM, przez = > Philippe =20 > MONROUX: > > >Bonjour, > > > > > >BUT WHEN I BOOT FROM UBOOT HERE THE RESULT : > > > >http://pagesperso-orange.fr/zygomaths/images/IMG_2644.JPG > > Did you nand erase kernel and rootfs before flashing? I have flashed (kernel + rootfs (~ 13 min for the rootfs)) one more time. And I get the same bad result : I can't boot from <<power button only>> nor by <<uboot+boot>> (in this case I obtain http://pagesperso-orange.fr/zygomaths/images/IMG_2644.JPG ) . I can only boot by <<uboot+Factory reset>>. So I think I have to <<cu -l /dev/ttyACM0>> (1) or <<minicom>> (2) (1) The problem is that cu don't work properly. I get root $> cu -l /dev/ttyACM0 Connected. but no cu prompt. And I can't enter the "nand erase clean rootfs or kernel" command (I can enter ~ the prompt appear and . to disconnect but it is unpredictable and uncertain). (2) And I'm not a specialist of minicom. When I run it with the following /etc/minicom/minirc.dfl pu port /dev/ttyACM0 pu baudrate 115200 pu bits 8 pu parity N pu stopbits 1 pu minit pu mreset pu mhangup pu updir /home/phi/soekris pu downdir /home/phi/soekris pu scriptdir /home/phi/soekris pu rtscts No I get that : http://pagesperso-orange.fr/zygomaths/images/Sans%20titre-2.jpg Really I think I need some help Thanks ph -- http://perso.orange.fr/zygomaths/index.fr.html
