> cu: /dev/ttyACM0: Line in use I remember I have seen that, but I d swear that was when I was not root.
> cu: creat (/var/lock/TMP0000001e89): Permission denied This is extra strange. Well, I don t have a system next to me right now, but please: 1. double-check you re root: whoami 2. Did you put the device into the right mode? You need to go into the bootloader and make sure you prepare it for flashing. That will put it into firmware upgrade mode rather then normal operating mode. Instructions are on the Wiki. You will have to hold a key while switching the phone on, then select an option from the boot loader menu and then hurry up because it will continue with a regular boot after 30 seconds. 3. There was some talk about having to chmod some device files, maybe someone from the list can help out. I need to leave not. Good luck. Regards, Torsten -------- Original-Nachricht -------- > Datum: Sun, 30 Dec 2007 11:56:53 +0100 > Von: "Linda Lind" <[EMAIL PROTECTED]> > An: "Torsten Schlabach" <[EMAIL PROTECTED]> > CC: [email protected], [EMAIL PROTECTED] > Betreff: Re: My new mobile > Hello Torsten! > > Yes i'm root > If not root I get this: > > cu: /etc/uucp/port: fopen: Permission denied > > //Linda > > > 2007/12/30, Torsten Schlabach <[EMAIL PROTECTED]>: > > Are you root? > > > > If not, try either > > > > sudo dfu-util ... > > > > or > > > > su - > > > > (enter root password) > > > > then try again. > > > > > > -------- Original-Nachricht -------- > > > Datum: Sun, 30 Dec 2007 11:29:09 +0100 > > > Von: "Linda Lind" <[EMAIL PROTECTED]> > > > An: "Tim Knapp" <[EMAIL PROTECTED]>, > [email protected] > > > Betreff: Re: My new mobile > > > > > Thank you Tim! > > > Can I ask wath this meens? > > > > > > cu: creat (/var/lock/TMP0000001e89): Permission denied > > > cu: /dev/ttyACM0: Line in use > > > > > > //Linda > > > > > > 2007/12/30, Tim Knapp <[EMAIL PROTECTED]>: > > > > > > > > On Sun, 2007-12-30 at 09:48 +0100, Linda Lind wrote: > > > > Thank you Andy! > > > > That's what I want to do, but I dont understand how to start. > > > > To get the system working on the computer. > > > > I dont understand the instruktions in the wiki I need help with the > > > > basic teknic to set up the dfu-util to work on my opensuse. > > > > > > > > > > > > Hi Linda, > > > > > > > > Just copy the binary and chmod+x and then run it from the command > line. > > > > > > > > -Tim > > > > > > > > > > > > //Linda > > > > 2007/12/30, andy selby <[EMAIL PROTECTED]>: > > > > > > Hi! > > > > > > I need some help with my new mobile! > > > > > > I dont understand where to start! > > > > > > I run openSuse 10.2. > > > > > > What am I supposed to install on my PC to get the option to > connect > > > to > > > > my neo? > > > > > > Or how do I do to install dfu-util? > > > > > > Is there any simpel howto for a newbie? > > > > > > Please help me!!!! > > > > > > //Linda > > > > > > > > > > Go to http://wiki.openmoko.org/wiki/Flashing_openmoko and > > > > follow the > > > > > instructions there. > > > > > If your not a developer, just someone who wants a functional phone > I > > > > > would advise you to install qtopia on your neo > > > > > http://wiki.openmoko.org/wiki/Qtopia_on_Neo1973 > > > > > get the tarball from here > > > > > > > > > http://www.qtopia.net/modules/mydownloads/singlefile.php?lid=50 > > > > and > > > > > unzip it to get the rootfs and kernel. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > //Ola > > > > > -- > //Ola
