Hi,
YOu said:
it got stuck in the boot process while
configuring packages.
This sounds as though it does actually boot.
In order to do flashing can you get a boot menu using just the phone?
Hold the aux button down and while it is down press the power button
until you sense a very small click, it should then respond by
bringing upwards a screen which says at the top
u-boot and some version information
BOOT MENU
Boot
Given that you can flash with dfu-util, I will tell you more if you get to
that point because I have to leave now and go home. If you dont get there
I cant help anyway.
clare
On Fri, 2 May 2008, Hermann Lacheiner wrote:
Hi neo owners,
I recently got a used neo1973 for testing purposes. I wanted to flash
the last recommended image, but it got stuck in the boot process while
configuring packages. So I think I have to clear the nand before
flashing the new image as stated in the wiki to completely remove
fragments of the old image.
The problem now is, that connecting to the u-boot console using usb
does not work for me. No u-boot prompt is appearing when connecting
with cu or screen, and there is no entry in the boot menu to "Set
Console to USB". I found another mail concerning this issue in the
archive, but no actual solution was provided. Could you give me some
hints resolving this issue. Thank you very much!
hermann
