Hi all, and sorry for the X-post, for who reads also openmoko-devel. I'm writing here now on suggestion from Michael. Some Days ago I finally had time to check my FreeRunner? and its Debug Board.
First of all I opened the Freerunner and made all the requested connection between the openmoko and the debug board (the cable and the USB connector), next I connected the debug board to my PC. Reading http://wiki.openmoko.org/wiki/Debug_board I see that my USB ID 0403:6010 request I need to reflash the debug board. So I started my tries with linux. Downloaded libftdi -> applied patch from http://people.openmoko.org/werner/libftdi-c56-strings-dirty-hack.patch Hunk 1 failed ... done manual patching Hunk 2 Succeed with Fuzz 1 Rechecked ftdi.c, it seems ok. Compiled and installed OK Downloaded ftdi_eeprom -> applied patch from http://people.openmoko.org/laforge/misc/debug_board_v2/ftdi_eeprom/ftdi_eeprom-0.2-moko.patch Succeed Downloaded - http://people.openmoko.org/laforge/misc/debug_board_v2/ftdi_eeprom/neo1973_debug_board_v2.ftdi - http://people.openmoko.org/laforge/misc/debug_board_v2/ftdi_eeprom/neo1973_debug_board_v2.eeprom <OK, I've the wrong vID,pID> What follows is cut'n'paste from my terminal. [EMAIL PROTECTED]:/home/alx/Documenti/openmoko# lsusb Bus 007 Device 015: ID 154b:000f Bus 007 Device 001: ID 0000:0000 Bus 006 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 027: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC Bus 003 Device 026: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub Bus 003 Device 019: ID 046d:c51b Logitech, Inc. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 [EMAIL PROTECTED]:/home/alx/Documenti/openmoko# ftdi_eeprom --flash-eeprom neo1973_debug_board_v2.ftdi FTDI eeprom generator v0.2 (c) Intra2net AG <[EMAIL PROTECTED]> FTDI init: 0 Unable to find FTDI devices under given vendor/product id: 0x1457/0x5118 Retrying with default FTDI id. Used eeprom space: 102 bytes FTDI write eeprom: 0 Writing to file: neo1973_debug_board_v2.eeprom FTDI close: 0 <Sconnected and reconnected the debug board> [EMAIL PROTECTED]:/home/alx/Documenti/openmoko# lsusb Bus 007 Device 015: ID 154b:000f Bus 007 Device 001: ID 0000:0000 Bus 006 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 029: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC Bus 003 Device 028: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub Bus 003 Device 019: ID 046d:c51b Logitech, Inc. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Any Idea on what's wrong ? -- Alessandro Sappia [EMAIL PROTECTED]
