This patch modifies the tegra i2c driver so that it can be initiailized
using the device tree along with the devices connected to the i2c bus.

Signed-off-by: John Bonesio <[email protected]>
Acked-by: Grant Likely <[email protected]>
Acked-by: OIof Johansson <[email protected]>
---

Sorry about the previous patch. It's not complete. This is the right one.

- John

 drivers/i2c/busses/i2c-tegra.c |   29 ++++++++++++++++++++++++++++-
 1 files changed, 28 insertions(+), 1 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 4d93196..b1d1456 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/i2c-tegra.h>
+#include <linux/of_i2c.h>
 
 #include <asm/unaligned.h>
 
@@ -540,6 +541,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
        struct resource *iomem;
        struct clk *clk;
        struct clk *i2c_clk;
+       const unsigned int *prop;
        void *base;
        int irq;
        int ret = 0;
@@ -597,7 +599,17 @@ static int tegra_i2c_probe(struct platform_device *pdev)
        i2c_dev->irq = irq;
        i2c_dev->cont_id = pdev->id;
        i2c_dev->dev = &pdev->dev;
-       i2c_dev->bus_clk_rate = pdata ? pdata->bus_clk_rate : 100000;
+
+       i2c_dev->bus_clk_rate = 100000; /* default clock rate */
+       if (pdata) {
+               i2c_dev->bus_clk_rate = pdata->bus_clk_rate;
+
+       } else if (i2c_dev->dev->of_node) {    /* if there is a device tree 
node ... */
+               prop = of_get_property(i2c_dev->dev->of_node,
+                               "clock-frequency", NULL);
+               if (prop)
+                       i2c_dev->bus_clk_rate = be32_to_cpup(prop);
+       }
 
        if (pdev->id == 3)
                i2c_dev->is_dvc = 1;
@@ -627,6 +639,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
        i2c_dev->adapter.algo = &tegra_i2c_algo;
        i2c_dev->adapter.dev.parent = &pdev->dev;
        i2c_dev->adapter.nr = pdev->id;
+       i2c_dev->adapter.dev.of_node = pdev->dev.of_node;
 
        ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
        if (ret) {
@@ -634,6 +647,8 @@ static int tegra_i2c_probe(struct platform_device *pdev)
                goto err_free_irq;
        }
 
+       of_i2c_register_devices(&i2c_dev->adapter);
+
        return 0;
 err_free_irq:
        free_irq(i2c_dev->irq, i2c_dev);
@@ -698,6 +713,17 @@ static int tegra_i2c_resume(struct platform_device *pdev)
 }
 #endif
 
+#if defined(CONFIG_OF)
+/* Match table for of_platform binding */
+static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
+        { .compatible = "nvidia,tegra250-i2c", },
+        {},
+};
+MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
+#else
+#define tegra_i2c_of_match NULL
+#endif
+
 static struct platform_driver tegra_i2c_driver = {
        .probe   = tegra_i2c_probe,
        .remove  = tegra_i2c_remove,
@@ -708,6 +734,7 @@ static struct platform_driver tegra_i2c_driver = {
        .driver  = {
                .name  = "tegra-i2c",
                .owner = THIS_MODULE,
+               .of_match_table = tegra_i2c_of_match,
        },
 };
 

_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to