On Mon, Jul 04, 2011 at 09:38:26AM +0200, Uwe Kleine-König wrote:
> On Mon, Jul 04, 2011 at 08:58:20AM +0200, Sascha Hauer wrote:
> > On Sun, Jul 03, 2011 at 03:56:00PM +0800, Shawn Guo wrote:
> > > It adds device tree probe support for imx tty/serial driver.
> > >
> > > Signed-off-by: Jeremy Kerr <[email protected]>
> > > Signed-off-by: Jason Liu <[email protected]>
> > > Signed-off-by: Shawn Guo <[email protected]>
> > > Cc: Sascha Hauer <[email protected]>
> > > Cc: Alan Cox <[email protected]>
> > > Cc: Grant Likely <[email protected]>
> > > ---
> > > .../bindings/tty/serial/fsl-imx-uart.txt | 19 +++++
> > > drivers/tty/serial/imx.c | 82
> > > +++++++++++++++++---
> > > 2 files changed, 91 insertions(+), 10 deletions(-)
> > > create mode 100644
> > > Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> > > b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> > > new file mode 100644
> > > index 0000000..a9c0406
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> > > @@ -0,0 +1,19 @@
> > > +* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
> > > +
> > > +Required properties:
> > > +- compatible : Should be "fsl,<soc>-uart"
> > > +- reg : Address and length of the register set for the device
> > > +- interrupts : Should contain uart interrupt
> > > +
> > > +Optional properties:
> > > +- fsl,uart-has-rtscts : Indicate the uart has rts and cts
> > > +- fsl,irda-mode : Indicate the uart supports irda mode
> > > +
> > > +Example:
> > > +
> > > +uart@73fbc000 {
> > > + compatible = "fsl,imx51-uart", "fsl,imx21-uart";
> > > + reg = <0x73fbc000 0x4000>;
> > > + interrupts = <31>;
> > > + fsl,uart-has-rtscts;
> > > +};
> > > diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> > > index 983f3bd..483c447 100644
> > > --- a/drivers/tty/serial/imx.c
> > > +++ b/drivers/tty/serial/imx.c
> > > @@ -45,6 +45,8 @@
> > > #include <linux/delay.h>
> > > #include <linux/rational.h>
> > > #include <linux/slab.h>
> > > +#include <linux/of.h>
> > > +#include <linux/of_device.h>
> > >
> > > #include <asm/io.h>
> > > #include <asm/irq.h>
> > > @@ -239,6 +241,12 @@ static struct platform_device_id imx_uart_devtype[]
> > > = {
> > > }
> > > };
> > >
> > > +static struct of_device_id imx_uart_dt_ids[] = {
> > > + { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART],
> > > },
> > > + { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX2_UART],
> > > },
> > > + { /* sentinel */ },
> > > +};
> >
> > Isn't this table a bit too small? What about the other SoCs?
> I'd expect that using fsl,imx21-uart on imx51 would result in a working
> port, but it feels stange and if that's the intention the example above
> needs fixing.
>
Here is what I have in dts file for uart. The 'compatible' tells
that it's a imx51-uart and compatible with imx21-uart.
uart0: uart@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
fsl,uart-has-rtscts;
};
I did not buy it until I got convinced by Grant here [1]. We do not
need this long table until there are some soc specific thing to
distinguish. Currently, they are all compatible with imx21-uart and
share imx_uart_devdata[IMX2_UART].
{ .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX2_UART], },
{ .compatible = "fsl,imx25-uart", .data = &imx_uart_devdata[IMX2_UART], },
{ .compatible = "fsl,imx27-uart", .data = &imx_uart_devdata[IMX2_UART], },
{ .compatible = "fsl,imx31-uart", .data = &imx_uart_devdata[IMX2_UART], },
{ .compatible = "fsl,imx35-uart", .data = &imx_uart_devdata[IMX2_UART], },
{ .compatible = "fsl,imx50-uart", .data = &imx_uart_devdata[IMX2_UART], },
{ .compatible = "fsl,imx51-uart", .data = &imx_uart_devdata[IMX2_UART], },
{ .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX2_UART], },
[1] http://permalink.gmane.org/gmane.linux.network/198935
--
Regards,
Shawn
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
