On Fri, 2011-07-15 at 17:44 +0800, Shawn Guo wrote:
> It adds device tree probe support for imx-sdma driver.
> 
> Signed-off-by: Shawn Guo <shawn....@linaro.org>
> Cc: Grant Likely <grant.lik...@secretlab.ca>
> Cc: Vinod Koul <vinod.k...@intel.com>
> Cc: Sascha Hauer <s.ha...@pengutronix.de>
I need an ack from Grant before I can apply this series

-- 
~Vinod
> ---
>  .../devicetree/bindings/dma/fsl-imx-sdma.txt       |   17 ++++++++
>  drivers/dma/imx-sdma.c                             |   41 ++++++++++++++++++-
>  2 files changed, 55 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
> 
> diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt 
> b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
> new file mode 100644
> index 0000000..d1e3f44
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
> @@ -0,0 +1,17 @@
> +* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
> +
> +Required properties:
> +- compatible : Should be "fsl,<chip>-sdma"
> +- reg : Should contain SDMA registers location and length
> +- interrupts : Should contain SDMA interrupt
> +- fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM
> +  scripts firmware
> +
> +Examples:
> +
> +sdma@83fb0000 {
> +     compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
> +     reg = <0x83fb0000 0x4000>;
> +     interrupts = <6>;
> +     fsl,sdma-ram-script-name = "sdma-imx51.bin";
> +};
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index 6b839a2..20504f0 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -32,6 +32,8 @@
>  #include <linux/slab.h>
>  #include <linux/platform_device.h>
>  #include <linux/dmaengine.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  
>  #include <asm/irq.h>
>  #include <mach/sdma.h>
> @@ -331,6 +333,12 @@ static struct platform_device_id sdma_devtypes[] = {
>       }
>  };
>  
> +static const struct of_device_id sdma_dt_ids[] = {
> +     { .compatible = "fsl,imx31-sdma", .data = &sdma_devtypes[IMX31_SDMA], },
> +     { .compatible = "fsl,imx35-sdma", .data = &sdma_devtypes[IMX35_SDMA], },
> +     { /* sentinel */ }
> +};
> +
>  #define SDMA_H_CONFIG_DSPDMA (1 << 12) /* indicates if the DSPDMA is used */
>  #define SDMA_H_CONFIG_RTD_PINS       (1 << 11) /* indicates if Real-Time 
> Debug pins are enabled */
>  #define SDMA_H_CONFIG_ACR    (1 << 4)  /* indicates if AHB freq /core freq = 
> 2 or 1 */
> @@ -1249,6 +1257,10 @@ err_dma_alloc:
>  
>  static int __init sdma_probe(struct platform_device *pdev)
>  {
> +     const struct of_device_id *of_id =
> +                     of_match_device(sdma_dt_ids, &pdev->dev);
> +     struct device_node *np = pdev->dev.of_node;
> +     const char *fw_name;
>       int ret;
>       int irq;
>       struct resource *iores;
> @@ -1264,7 +1276,7 @@ static int __init sdma_probe(struct platform_device 
> *pdev)
>  
>       iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>       irq = platform_get_irq(pdev, 0);
> -     if (!iores || irq < 0 || !pdata) {
> +     if (!iores || irq < 0) {
>               ret = -EINVAL;
>               goto err_irq;
>       }
> @@ -1294,6 +1306,8 @@ static int __init sdma_probe(struct platform_device 
> *pdev)
>       if (!sdma->script_addrs)
>               goto err_alloc;
>  
> +     if (of_id)
> +             pdev->id_entry = of_id->data;
>       sdma->devtype = pdev->id_entry->driver_data;
>  
>       dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask);
> @@ -1324,10 +1338,30 @@ static int __init sdma_probe(struct platform_device 
> *pdev)
>       if (ret)
>               goto err_init;
>  
> -     if (pdata->script_addrs)
> +     if (pdata && pdata->script_addrs)
>               sdma_add_scripts(sdma, pdata->script_addrs);
>  
> -     sdma_get_firmware(sdma, pdata->fw_name);
> +     if (pdata) {
> +             sdma_get_firmware(sdma, pdata->fw_name);
> +     } else {
> +             /*
> +              * Because that device tree does not encode ROM script address,
> +              * the RAM script in firmware is mandatory for device tree
> +              * probe, otherwise it fails.
> +              */
> +             ret = of_property_read_string(np, "fsl,sdma-ram-script-name",
> +                                           &fw_name);
> +             if (ret) {
> +                     dev_err(&pdev->dev, "failed to get firmware name\n");
> +                     goto err_init;
> +             }
> +
> +             ret = sdma_get_firmware(sdma, fw_name);
> +             if (ret) {
> +                     dev_err(&pdev->dev, "failed to get firmware\n");
> +                     goto err_init;
> +             }
> +     }
>  
>       sdma->dma_device.dev = &pdev->dev;
>  
> @@ -1375,6 +1409,7 @@ static int __exit sdma_remove(struct platform_device 
> *pdev)
>  static struct platform_driver sdma_driver = {
>       .driver         = {
>               .name   = "imx-sdma",
> +             .of_match_table = sdma_dt_ids,
>       },
>       .id_table       = sdma_devtypes,
>       .remove         = __exit_p(sdma_remove),



_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to