Add a device-tree node for the spinlock.
Remove the static device build code if CONFIG_OF
is set.
Update the hwspinlock driver to use the of_match method.
Add the information in Documentation/devicetree.
Add documentation for the HW spinlock in OMAP4.
Signed-off-by: Benoit Cousson <b-cous...@ti.com>
Cc: Grant Likely <grant.lik...@secretlab.ca>
Cc: Ohad Ben-Cohen <o...@wizery.com>
---
.../bindings/hwspinlock/omap-spinlock.txt | 5 +++++
arch/arm/boot/dts/omap4.dtsi | 5 +++++
arch/arm/mach-omap2/hwspinlock.c | 5 +++++
drivers/hwspinlock/omap_hwspinlock.c | 11 +++++++++++
4 files changed, 26 insertions(+), 0 deletions(-)
create mode 100644
Documentation/devicetree/bindings/hwspinlock/omap-spinlock.txt
diff --git a/Documentation/devicetree/bindings/hwspinlock/omap-spinlock.txt
b/Documentation/devicetree/bindings/hwspinlock/omap-spinlock.txt
new file mode 100644
index 0000000..4cea7cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwspinlock/omap-spinlock.txt
@@ -0,0 +1,5 @@
+* HW spinlock on OMAP4 platform:
+
+Required properties:
+- compatible : Must be "ti,omap4-spinlock";
+- ti,hwmods : "spinlock"
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 4c61c82..7a7f31e 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -99,5 +99,10 @@
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
};
+
+ spinlock {
+ compatible = "ti,omap4-spinlock";
+ ti,hwmods = "spinlock";
+ };
};
};
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 36e2109..80fc18f 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
@@ -31,6 +32,10 @@ int __init hwspinlocks_init(void)
const char *oh_name = "spinlock";
const char *dev_name = "omap_hwspinlock";
+ /* If dtb is there, the devices will be created dynamically */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
/*
* Hwmod lookup will fail in case our platform doesn't support the
* hardware spinlock module, so it is safe to run this initcall
diff --git a/drivers/hwspinlock/omap_hwspinlock.c
b/drivers/hwspinlock/omap_hwspinlock.c
index a8f0273..8dfa730 100644
--- a/drivers/hwspinlock/omap_hwspinlock.c
+++ b/drivers/hwspinlock/omap_hwspinlock.c
@@ -203,11 +203,22 @@ static int omap_hwspinlock_remove(struct platform_device
*pdev)
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id spinlock_match[] = {
+ {.compatible = "ti,omap4-spinlock", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, spinlock_match);
+#else
+#define spinlock_match NULL
+#endif
+
static struct platform_driver omap_hwspinlock_driver = {
.probe = omap_hwspinlock_probe,
.remove = omap_hwspinlock_remove,
.driver = {
.name = "omap_hwspinlock",
+ .of_match_table = spinlock_match,
},
};
--
1.7.0.4
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
