Add the known i2c devices on seaboard to the i2c table. Also rename the temperature sensor device node, and mark it as a nct1008 instead of an adt7461 (which it is -- the chips are compatible though).
Signed-off-by: Olof Johansson <[email protected]> --- arch/arm/boot/dts/tegra-seaboard.dts | 29 +++++++++++++++++++++++++++-- 1 files changed, 27 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index b55a02e..b64e0bd 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -13,6 +13,18 @@ i2c@7000c000 { clock-frequency = <400000>; + + light-sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupts = < 0 202 0x04 >; /* gpio PZ2 */ + }; + + gyrometer@68 { + compatible = "invn,mpu3050"; + reg = <0x68>; + interrupts = < 0 204 0x04 >; /* gpio PZ4 */ + }; }; i2c@7000c400 { @@ -21,15 +33,28 @@ i2c@7000c500 { clock-frequency = <400000>; + + smart-battery@b { + compatible = "ti,bq20z75", "smart-battery-1.1"; + ti,i2c-retry-count = < 2 >; + ti,poll-retry-count = < 10 >; + reg = <0xb>; + }; }; i2c@7000d000 { clock-frequency = <400000>; - adt7461@4c { - compatible = "adt7461"; + temperature-sensor@4c { + compatible = "nct1008"; reg = <0x4c>; }; + + magnetometer@c { + compatible = "ak8975"; + reg = <0xc>; + interrupts = < 0 109 0x04 >; /* gpio PN5 */ + }; }; serial@70006000 { -- 1.7.8.GIT _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
