On Fri, Dec 09, 2011 at 03:02:37PM +0100, Benoit Cousson wrote: > Add i2c controllers nodes into the main ocp bus. > > Signed-off-by: Benoit Cousson <b-cous...@ti.com> > Cc: Grant Likely <grant.lik...@secretlab.ca> > Cc: Rob Herring <rob.herr...@calxeda.com>
Acked-by: Grant Likely <grant.lik...@secretlab.ca> > --- > arch/arm/boot/dts/omap3.dtsi | 28 ++++++++++++++++++++++++++++ > 1 files changed, 28 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi > index 6866dc7..81d8e2c 100644 > --- a/arch/arm/boot/dts/omap3.dtsi > +++ b/arch/arm/boot/dts/omap3.dtsi > @@ -61,5 +61,33 @@ > ti,intc-size = <96>; > reg = <0x48200000 0x1000>; > }; > + > + /* > + * Flags for all i2c instances: 0x118 > + * APPLY_ERRATA_I207 | RESET_REGS_POSTIDLE | BUS_SHIFT_2 > + */ > + i2c1: i2c@1 { > + compatible = "ti,omap3-i2c"; > + #address-cells = <1>; > + #size-cells = <0>; > + ti,hwmods = "i2c1"; > + ti,flags = <0x118>; > + }; > + > + i2c2: i2c@2 { > + compatible = "ti,omap3-i2c"; > + #address-cells = <1>; > + #size-cells = <0>; > + ti,hwmods = "i2c2"; > + ti,flags = <0x118>; > + }; > + > + i2c3: i2c@3 { > + compatible = "ti,omap3-i2c"; > + #address-cells = <1>; > + #size-cells = <0>; > + ti,hwmods = "i2c3"; > + ti,flags = <0x118>; > + }; > }; > }; > -- > 1.7.0.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-ker...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss