On 14/02/12 01:43, Nicolas Ferre wrote: > gpio_to_irq() implementation will be moved from a macro to a > plain function: we cannot use it in a structure initialization > anymore.
What was the reason for the change? It was originally a macro for exactly this reason. Anyway, Reviewed-by: Ryan Mallon <[email protected]> > Signed-off-by: Nicolas Ferre <[email protected]> > Acked-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]> > Cc: [email protected] > --- > arch/arm/mach-at91/board-snapper9260.c | 10 +++++++--- > 1 files changed, 7 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/mach-at91/board-snapper9260.c > b/arch/arm/mach-at91/board-snapper9260.c > index 4770db0..3c2e3fc 100644 > --- a/arch/arm/mach-at91/board-snapper9260.c > +++ b/arch/arm/mach-at91/board-snapper9260.c > @@ -145,11 +145,11 @@ static struct i2c_board_info __initdata > snapper9260_i2c_devices[] = { > /* Audio codec */ > I2C_BOARD_INFO("tlv320aic23", 0x1a), > }, > - { > +}; > + > +static struct i2c_board_info __initdata snapper9260_i2c_isl1208 = { > /* RTC */ > I2C_BOARD_INFO("isl1208", 0x6f), > - .irq = gpio_to_irq(AT91_PIN_PA31), > - }, > }; > > static void __init snapper9260_add_device_nand(void) > @@ -163,6 +163,10 @@ static void __init snapper9260_board_init(void) > { > at91_add_device_i2c(snapper9260_i2c_devices, > ARRAY_SIZE(snapper9260_i2c_devices)); > + > + snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31); > + i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1); > + > at91_add_device_serial(); > at91_add_device_usbh(&snapper9260_usbh_data); > at91_add_device_udc(&snapper9260_udc_data); _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
