On 02/27/2012 03:14 PM, Nicolas Ferre : > Hi, Hi,
Hold on with this pull request: - I can now base the similar one on top of the "cleanup2" branch - the irqdomain/next is now considered stable so I can merge it beforehand - I can add some more material to it (still related to AT91 the Device Tree conversion) Thanks, best regards, > This series adds irqdomain and device tree support for both the > interrupt and GPIO controllers of AT91 SoC. It has been discussed a lot > and I think that I have addressed all comments and advices. > > This irqdomain work takes advantage of Grant's patch series that is present > in: > git://git.secretlab.ca/git/linux-2.6 irqdomain/next > And it will not compile without it. So, the inclusion of such work is needed > before we can apply this series on mainline. > > On the other hand, I have not included Grant's branch in mine on purpose: All > this simply goes on top of current AT91 material that is already in arm-soc > (merge of all at91/* branches). You can find it in the AT91 git tree with > at91-3.4-base2 branch name). I have made merge tests and all seems to > integrate > without conflicts. > > > The following changes since commit 11a25ea7e4f870a37093258f577e11cec703e37e: > > Merge remote-tracking branch 'armsoc/at91/9x5' into at91-3.4-base2 > (2012-02-11 14:33:03 +0100) > > are available in the git repository at: > > > git://github.com/at91linux/linux-at91.git at91-3.4-base2+aic_gpio > > for you to fetch changes up to 29751864cc12425fe2b3a75658baea9ebe54609e: > > ARM: at91: AIC and GPIO IRQ device tree initialization (2012-02-27 14:38:08 > +0100) > > ---------------------------------------------------------------- > Nicolas Ferre (10): > ARM: at91/aic: add irq domain and device tree support > ARM: at91/snapper9260: move gpio_to_irq out of structure initialization > ARM/USB: at91/ohci-at91: remove the use of irq_to_gpio > ARM: at91/gpio: change comments and one variable name > ARM: at91/gpio: add irqdomain and DT support > ARM: at91/gpio: non-DT builds do not have gpio_chip.of_node field > ARM: at91/gpio: add .to_irq gpio_chip handler > ARM: at91/gpio: remove the static specification of gpio_chip.base > ARM: at91/board-dt: remove AIC irq domain from board file > ARM: at91: AIC and GPIO IRQ device tree initialization > > .../devicetree/bindings/arm/atmel-aic.txt | 38 ++ > .../devicetree/bindings/gpio/gpio_atmel.txt | 20 + > arch/arm/Kconfig | 1 + > arch/arm/boot/dts/at91sam9g20.dtsi | 48 ++- > arch/arm/boot/dts/at91sam9g45.dtsi | 66 +++- > arch/arm/boot/dts/at91sam9x5.dtsi | 4 + > arch/arm/mach-at91/board-dt.c | 13 +- > arch/arm/mach-at91/board-snapper9260.c | 10 +- > arch/arm/mach-at91/generic.h | 6 + > arch/arm/mach-at91/gpio.c | 363 > ++++++++++++++++---- > arch/arm/mach-at91/include/mach/gpio.h | 12 - > arch/arm/mach-at91/irq.c | 132 ++++++-- > drivers/usb/host/ohci-at91.c | 5 +- > 13 files changed, 581 insertions(+), 137 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/atmel-aic.txt > create mode 100644 Documentation/devicetree/bindings/gpio/gpio_atmel.txt > > Thanks a lot, best regards, -- Nicolas Ferre _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss