On 12:38 Wed 14 Mar , Giuseppe CAVALLARO wrote: > On 3/12/2012 3:38 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > > On 15:05 Mon 12 Mar , Stefan Roese wrote: > >> This patch adds support to configure the STMMAC ethernet driver via > >> device-tree instead of platform_data. > >> > >> Currently, only the properties needed on SPEAr600 are provided. All > >> other properties should be added once needed on other platforms. > >> > >> Signed-off-by: Stefan Roese <s...@denx.de> > >> Cc: Giuseppe Cavallaro <peppe.cavall...@st.com> > >> Cc: Viresh Kumar <viresh.ku...@st.com> > >> --- > >> Documentation/devicetree/bindings/net/stmmac.txt | 38 +++++++++++ > >> .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 66 > >> +++++++++++++++++++- > >> 2 files changed, 103 insertions(+), 1 deletion(-) > >> create mode 100644 Documentation/devicetree/bindings/net/stmmac.txt > >> > >> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt > >> b/Documentation/devicetree/bindings/net/stmmac.txt > >> new file mode 100644 > >> index 0000000..386a47f > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/net/stmmac.txt > >> @@ -0,0 +1,38 @@ > >> +* STMicroelectronics 10/100/1000 Ethernet driver (GMAC) > >> + > >> +Required properties: > >> +- compatible: Should be "stm,gmac" > > > this IP have 2 version at least the GMAC for the second generation and mac > > for > > the first generation > > yes you are right. STMMAC supports two device generations I named: > dwma10/100 and dwmac1000 (gmac). > > Concerning the latter, we support several different versions of the > synopsys GMAC cores ... from 3.30 to 3.61a. > > For example, stx7108 and Stx7109 have the same GMAC core (also SPEAr600 > IIRC). no PM the PM was only since 7108 IIRC
7109 use mac not gmac IIRC it's 7105 that start to use the GMAC with 300Mbps max > SPEAr13xx has 3.50a > New ST SoC Stxh415 has the 3.60a. etc. > > >> +- reg: Address and length of the register set for the device > >> +- interrupt-parent: Should be the phandle for the interrupt controller > >> + that services interrupts for this device > >> +- interrupts: Should contain the STMMAC interrupts > >> +- interrupt-names: Should contain the interrupt names "macirq" > >> + "eth_wake_irq" if this interrupt is supported in the "interrupts" > >> + property > > optionnal > > yes > > note that there will be a new field for lpi IRQ as well > > >> +- phy-mode: String, operation mode of the PHY interface. > >> + Supported values are: "mii", "rmii", "gmii", "rgmii". > >> +- phy-addr: MDIO address of the PHY > >> + > >> +Optional properties: > >> +- stm,prog-burst-len: Specify the burst length > >> +- stm,has-gmac: Indicates that the controller supports 1000Mbps > > this IP support more mode 10/100/300/1000 > > has_gmac was used to understand on devices w/o the HW cap registers if > the core is a gmac... another useful parameter could be : enh_desc this need to manage via compatible Best Regards, J. _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss
