On Mar 19, 2012, at 8:02 PM, Poonam Aggrwal wrote:
> This TDM controller is available in various Freescale SOCs like MPC8315,
> P1020,
> P1022, P1010.
>
> Signed-off-by: Sandeep Singh <sand...@freescale.com>
> Signed-off-by: Poonam Aggrwal <poonam.aggr...@freescale.com>
> ---
> Changes in v2:
> - Incorporated Scott's Review comments
> Documentation/devicetree/bindings/tdm/fsl-tdm.txt | 67 +++++++++++++++++++++
> 1 files changed, 67 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/tdm/fsl-tdm.txt
>
> diff --git a/Documentation/devicetree/bindings/tdm/fsl-tdm.txt
> b/Documentation/devicetree/bindings/tdm/fsl-tdm.txt
> new file mode 100644
> index 0000000..6553dbe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/tdm/fsl-tdm.txt
> @@ -0,0 +1,67 @@
> +=====================================================================
> +TDM Device Tree Binding
> +Copyright (C) 2012 Freescale Semiconductor Inc.
> +
> +NOTE: The bindings described in this document are preliminary
> +and subject to change.
> +
> +=====================================================================
> +TDM (Time Division Multiplexing)
> +
> +DESCRIPTION
> +
> +The TDM is full duplex serial port designed to allow various devices
> including
> +digital signal processors (DSPs) to communicate with a variety of serial
> devices
> +including industry standard framers, codecs, other DSPs and microprocessors.
> +
> +The below properties describe the device tree bindings for Freescale TDM
> +controller.
> +This TDM controller is available on various Freescale Processors like
> +MPC8315, P1020, P1022 and P1010.
> +
> +PROPERTIES
> +
> + - compatible
> + Usage: required
> + Value type: <string>
> + Definition: Should contain "fsl,mpc8315-tdm".
> + So mpc8315 will have compatible = "fsl,mpc8315-tdm";
> + p1010 will have compatible "fsl,p1010-tdm", "fsl,mpc8315-tdm";
> +
> + - reg
> + Usage: required
> + Definition: There are two reg resources. First is for TDM registers
> and
> + the second for TDM DMAC registers.
> +
> + - clock-frequency
> + Usage: optional
> + Value type: <u32>
> + Definition: The frequency at which the TDM block is operating.
> +
> + - interrupts
> + Usage: required
> + Definition: This field defines the interrupt specifiers for the two
> + interrupts. First is for TDM error and second for TDM DMAC.
> +
> + - phy-handle
> + Usage: optional
> + Value type: <phandle>
> + Definition: Phandle of the line controller node or framer node eg.
> SLIC,
> + E1/T1 etc.
Which way are we going with the name of such handle properties? Ie should this
be 'tdm-phy-handle' or keeping it generic is ok?
> +
> + - fsl,max-time-slots
> + Usage: required
> + Value type: <u32>
> + Definition: Maximum number of 8-bit time slots in one TDM frame.
> + This is the maximum number which TDM hardware supports.
> +
> +EXAMPLE
> +
> + tdm@16000 {
> + compatible = "fsl,p1010-tdm", "fsl,mpc8315-tdm";
> + reg = <0x16000 0x200 0x2c000 0x2000>;
> + clock-frequency = <399999999>; /* typically filled by u-boot */
> + interrupts = <16 8 62 8>;
> + phy-handle = <&zarlink1>;
> + fsl-max-time-slots = <128>;
> + };
> --
> 1.6.5.6
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> linuxppc-...@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
