This patch implements the basic single data conversion support for
the SPEAr600 SoC ADC. The register layout of SPEAr600 differs a bit
from other SPEAr SoC variants (e.g. SPEAr3xx). These differences are
handled via DT compatible testing. Resulting in a multi-arch binary.
This driver is currently tested only on SPEAr600. Future patches may add
support for other SoC variants (SPEAr3xx) and features like software
buffer or DMA.
Signed-off-by: Stefan Roese <s...@denx.de>
Acked-by: Jonathan Cameron <ji...@kernel.org>
Acked-by: Viresh Kumar <viresh.ku...@st.com>
Cc: Greg KH <g...@kroah.com>
---
v3:
- Used devm_request_irq() instead of request_irq and removed free_irq()
- Added clk_disable() and clk_unprepare() in error path and
spear_adc_remove()
v2:
- Minor spelling fixes pointed out by Jonathan
- Renamed scale_uv to scale_mv
- Used defines for constants (CLK_MIN, CLK_MAX)
- Used of_iomap() instead of ioremap() and platform_get_resource()
- Added clk_prepare()
- Added error checking to clk_enable()
.../bindings/staging/iio/adc/spear-adc.txt | 26 ++
drivers/staging/iio/adc/Kconfig | 7 +
drivers/staging/iio/adc/Makefile | 1 +
drivers/staging/iio/adc/spear_adc.c | 447 ++++++++++++++++++++
4 files changed, 481 insertions(+)
create mode 100644
Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
create mode 100644 drivers/staging/iio/adc/spear_adc.c
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
new file mode 100644
index 0000000..02ea23a
--- /dev/null
+++ b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
@@ -0,0 +1,26 @@
+* ST SPEAr ADC device driver
+
+Required properties:
+- compatible: Should be "st,spear600-adc"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the ADC interrupt
+- sampling-frequency: Default sampling frequency
+
+Optional properties:
+- vref-external: External voltage reference in milli-volts. If omitted
+ the internal voltage reference will be used.
+- average-samples: Number of samples to generate an average value. If
+ omitted, single data conversion will be used.
+
+Examples:
+
+ adc: adc@d8200000 {
+ compatible = "st,spear600-adc";
+ reg = <0xd8200000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <6>;
+ sampling-frequency = <5000000>;
+ vref-external = <2500>; /* 2.5V VRef */
+ };
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index 592eabd..ec006e7 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -202,4 +202,11 @@ config LPC32XX_ADC
touchscreen driver, so you can only select one of the two drivers
(lpc32xx_adc or lpc32xx_ts). Provides direct access via sysfs.
+config SPEAR_ADC
+ tristate "ST SPEAr ADC"
+ depends on PLAT_SPEAR
+ help
+ Say yes here to build support for the integrated ADC inside the
+ ST SPEAr SoC. Provides direct access via sysfs.
+
endmenu
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index f83ab95..14e98b6 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_ADT7310) += adt7310.o
obj-$(CONFIG_ADT7410) += adt7410.o
obj-$(CONFIG_AD7280) += ad7280a.o
obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
+obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
diff --git a/drivers/staging/iio/adc/spear_adc.c
b/drivers/staging/iio/adc/spear_adc.c
new file mode 100644
index 0000000..bea5778
--- /dev/null
+++ b/drivers/staging/iio/adc/spear_adc.c
@@ -0,0 +1,447 @@
+/*
+ * ST SPEAr ADC driver
+ *
+ * Copyright 2012 Stefan Roese <s...@denx.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+
+/*
+ * SPEAR registers definitions
+ */
+
+#define SCAN_RATE_LO(x) ((x) & 0xFFFF)
+#define SCAN_RATE_HI(x) (((x) >> 0x10) & 0xFFFF)
+#define CLK_LOW(x) (((x) & 0xf) << 0)
+#define CLK_HIGH(x) (((x) & 0xf) << 4)
+
+/* Bit definitions for SPEAR_ADC_STATUS */
+#define START_CONVERSION (1 << 0)
+#define CHANNEL_NUM(x) ((x) << 1)
+#define ADC_ENABLE (1 << 4)
+#define AVG_SAMPLE(x) ((x) << 5)
+#define VREF_INTERNAL (1 << 9)
+
+#define DATA_MASK 0x03ff
+#define DATA_BITS 10
+
+#define MOD_NAME "spear-adc"
+
+#define ADC_CHANNEL_NUM 8
+
+#define CLK_MIN 2500000
+#define CLK_MAX 20000000
+
+struct adc_regs_spear3xx {
+ u32 status;
+ u32 average;
+ u32 scan_rate;
+ u32 clk; /* Not avail for 1340 & 1310 */
+ u32 ch_ctrl[ADC_CHANNEL_NUM];
+ u32 ch_data[ADC_CHANNEL_NUM];
+};
+
+struct chan_data {
+ u32 lsb;
+ u32 msb;
+};
+
+struct adc_regs_spear6xx {
+ u32 status;
+ u32 pad[2];
+ u32 clk;
+ u32 ch_ctrl[ADC_CHANNEL_NUM];
+ struct chan_data ch_data[ADC_CHANNEL_NUM];
+ u32 scan_rate_lo;
+ u32 scan_rate_hi;
+ struct chan_data average;
+};
+
+struct spear_adc_info {
+ struct device_node *np;
+ struct adc_regs_spear3xx __iomem *adc_base_spear3xx;
+ struct adc_regs_spear6xx __iomem *adc_base_spear6xx;
+ struct clk *clk;
+ struct completion completion;
+ u32 current_clk;
+ u32 sampling_freq;
+ u32 avg_samples;
+ u32 vref_external;
+ u32 value;
+};
+
+/*
+ * Functions to access some SPEAr ADC register. Abstracted into
+ * static inline functions, because of different register offsets
+ * on different SoC variants (SPEAr300 vs SPEAr600 etc).
+ */
+static void spear_adc_set_status(struct spear_adc_info *info, u32 val)
+{
+ __raw_writel(val, &info->adc_base_spear6xx->status);
+}
+
+static void spear_adc_set_clk(struct spear_adc_info *info, u32 val)
+{
+ u32 clk_high, clk_low, count;
+ u32 apb_clk = clk_get_rate(info->clk);
+
+ count = (apb_clk + val - 1) / val;
+ clk_low = count / 2;
+ clk_high = count - clk_low;
+ info->current_clk = apb_clk / count;
+
+ __raw_writel(CLK_LOW(clk_low) | CLK_HIGH(clk_high),
+ &info->adc_base_spear6xx->clk);
+}
+
+static void spear_adc_set_ctrl(struct spear_adc_info *info, int n,
+ u32 val)
+{
+ __raw_writel(val, &info->adc_base_spear6xx->ch_ctrl[n]);
+}
+
+static u32 spear_adc_get_average(struct spear_adc_info *info)
+{
+ if (of_device_is_compatible(info->np, "st,spear600-adc")) {
+ return __raw_readl(&info->adc_base_spear6xx->average.msb) &
+ DATA_MASK;
+ } else {
+ return __raw_readl(&info->adc_base_spear3xx->average) &
+ DATA_MASK;
+ }
+}
+
+static void spear_adc_set_scanrate(struct spear_adc_info *info, u32 rate)
+{
+ if (of_device_is_compatible(info->np, "st,spear600-adc")) {
+ __raw_writel(SCAN_RATE_LO(rate),
+ &info->adc_base_spear6xx->scan_rate_lo);
+ __raw_writel(SCAN_RATE_HI(rate),
+ &info->adc_base_spear6xx->scan_rate_hi);
+ } else {
+ __raw_writel(rate, &info->adc_base_spear3xx->scan_rate);
+ }
+}
+
+static int spear_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct spear_adc_info *info = iio_priv(indio_dev);
+ u32 scale_mv;
+ u32 status;
+
+ switch (mask) {
+ case 0:
+ mutex_lock(&indio_dev->mlock);
+
+ status = CHANNEL_NUM(chan->channel) |
+ AVG_SAMPLE(info->avg_samples) |
+ START_CONVERSION | ADC_ENABLE;
+ if (info->vref_external == 0)
+ status |= VREF_INTERNAL;
+
+ spear_adc_set_status(info, status);
+ wait_for_completion(&info->completion); /* set by ISR */
+ *val = info->value;
+
+ mutex_unlock(&indio_dev->mlock);
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ scale_mv = (info->vref_external * 1000) >> DATA_BITS;
+ *val = scale_mv / 1000;
+ *val2 = (scale_mv % 1000) * 1000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+
+ return -EINVAL;
+}
+
+#define SPEAR_ADC_CHAN(idx) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \
+ .channel = idx, \
+ .scan_type = { \
+ .sign = 'u', \
+ .storagebits = 16, \
+ }, \
+}
+
+static struct iio_chan_spec spear_adc_iio_channels[] = {
+ SPEAR_ADC_CHAN(0),
+ SPEAR_ADC_CHAN(1),
+ SPEAR_ADC_CHAN(2),
+ SPEAR_ADC_CHAN(3),
+ SPEAR_ADC_CHAN(4),
+ SPEAR_ADC_CHAN(5),
+ SPEAR_ADC_CHAN(6),
+ SPEAR_ADC_CHAN(7),
+};
+
+static irqreturn_t spear_adc_isr(int irq, void *dev_id)
+{
+ struct spear_adc_info *info = (struct spear_adc_info *)dev_id;
+
+ /* Read value to clear IRQ */
+ info->value = spear_adc_get_average(info);
+ complete(&info->completion);
+
+ return IRQ_HANDLED;
+}
+
+static int spear_adc_configure(struct spear_adc_info *info)
+{
+ int i;
+
+ /* Reset ADC core */
+ spear_adc_set_status(info, 0);
+ __raw_writel(0, &info->adc_base_spear6xx->clk);
+ for (i = 0; i < 8; i++)
+ spear_adc_set_ctrl(info, i, 0);
+ spear_adc_set_scanrate(info, 0);
+
+ spear_adc_set_clk(info, info->sampling_freq);
+
+ return 0;
+}
+
+static ssize_t spear_adc_read_frequency(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct spear_adc_info *info = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", info->current_clk);
+}
+
+static ssize_t spear_adc_write_frequency(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct spear_adc_info *info = iio_priv(indio_dev);
+ u32 clk_high, clk_low, count;
+ u32 apb_clk = clk_get_rate(info->clk);
+ unsigned long lval;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &lval);
+ if (ret)
+ return ret;
+
+ mutex_lock(&indio_dev->mlock);
+
+ if ((lval < CLK_MIN) || (lval > CLK_MAX)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ count = (apb_clk + lval - 1) / lval;
+ clk_low = count / 2;
+ clk_high = count - clk_low;
+ info->current_clk = apb_clk / count;
+ spear_adc_set_clk(info, lval);
+
+out:
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret ? ret : len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ spear_adc_read_frequency,
+ spear_adc_write_frequency);
+
+static struct attribute *spear_attributes[] = {
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group spear_attribute_group = {
+ .attrs = spear_attributes,
+};
+
+static const struct iio_info spear_adc_iio_info = {
+ .read_raw = &spear_read_raw,
+ .attrs = &spear_attribute_group,
+ .driver_module = THIS_MODULE,
+};
+
+static int __devinit spear_adc_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct spear_adc_info *info;
+ struct iio_dev *iodev = NULL;
+ int ret = -ENODEV;
+ int irq;
+
+ iodev = iio_allocate_device(sizeof(struct spear_adc_info));
+ if (!iodev) {
+ dev_err(dev, "failed allocating iio device\n");
+ ret = -ENOMEM;
+ goto errout1;
+ }
+
+ info = iio_priv(iodev);
+ info->np = np;
+
+ /*
+ * SPEAr600 has a different register layout than other SPEAr SoC's
+ * (e.g. SPEAr3xx). Let's provide two register base addresses
+ * to support multi-arch kernels.
+ */
+ info->adc_base_spear6xx = of_iomap(np, 0);
+ if (!info->adc_base_spear6xx) {
+ dev_err(dev, "failed mapping memory\n");
+ ret = -ENOMEM;
+ goto errout2;
+ }
+ info->adc_base_spear3xx =
+ (struct adc_regs_spear3xx *)info->adc_base_spear6xx;
+
+ info->clk = clk_get(dev, NULL);
+ if (IS_ERR(info->clk)) {
+ dev_err(dev, "failed getting clock\n");
+ goto errout3;
+ }
+
+ ret = clk_prepare(info->clk);
+ if (ret) {
+ dev_err(dev, "failed preparing clock\n");
+ goto errout4;
+ }
+
+ ret = clk_enable(info->clk);
+ if (ret) {
+ dev_err(dev, "failed enabling clock\n");
+ goto errout5;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if ((irq < 0) || (irq >= NR_IRQS)) {
+ dev_err(dev, "failed getting interrupt resource\n");
+ ret = -EINVAL;
+ goto errout6;
+ }
+
+ ret = devm_request_irq(dev, irq, spear_adc_isr, 0, MOD_NAME, info);
+ if (ret < 0) {
+ dev_err(dev, "failed requesting interrupt\n");
+ goto errout6;
+ }
+
+ if (of_property_read_u32(np, "sampling-frequency",
+ &info->sampling_freq)) {
+ dev_err(dev, "sampling-frequency missing in DT\n");
+ ret = -EINVAL;
+ goto errout6;
+ }
+
+ /*
+ * Optional avg_samples defaults to 0, resulting in single data
+ * conversion
+ */
+ of_property_read_u32(np, "average-samples", &info->avg_samples);
+
+ /*
+ * Optional vref_external defaults to 0, resulting in internal vref
+ * selection
+ */
+ of_property_read_u32(np, "vref-external", &info->vref_external);
+
+ spear_adc_configure(info);
+
+ platform_set_drvdata(pdev, iodev);
+
+ init_completion(&info->completion);
+
+ iodev->name = MOD_NAME;
+ iodev->dev.parent = dev;
+ iodev->info = &spear_adc_iio_info;
+ iodev->modes = INDIO_DIRECT_MODE;
+ iodev->channels = spear_adc_iio_channels;
+ iodev->num_channels = ARRAY_SIZE(spear_adc_iio_channels);
+
+ ret = iio_device_register(iodev);
+ if (ret)
+ goto errout6;
+
+ dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq);
+
+ return 0;
+
+errout6:
+ clk_disable(info->clk);
+errout5:
+ clk_unprepare(info->clk);
+errout4:
+ clk_put(info->clk);
+errout3:
+ iounmap(info->adc_base_spear6xx);
+errout2:
+ iio_free_device(iodev);
+errout1:
+ return ret;
+}
+
+static int __devexit spear_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *iodev = platform_get_drvdata(pdev);
+ struct spear_adc_info *info = iio_priv(iodev);
+
+ iio_device_unregister(iodev);
+ platform_set_drvdata(pdev, NULL);
+ clk_disable(info->clk);
+ clk_unprepare(info->clk);
+ clk_put(info->clk);
+ iounmap(info->adc_base_spear6xx);
+ iio_free_device(iodev);
+
+ return 0;
+}
+
+static const struct of_device_id spear_adc_dt_ids[] = {
+ { .compatible = "st,spear600-adc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
+
+static struct platform_driver spear_adc_driver = {
+ .probe = spear_adc_probe,
+ .remove = __devexit_p(spear_adc_remove),
+ .driver = {
+ .name = MOD_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(spear_adc_dt_ids),
+ },
+};
+
+module_platform_driver(spear_adc_driver);
+
+MODULE_AUTHOR("Stefan Roese <s...@denx.de>");
+MODULE_DESCRIPTION("SPEAr ADC driver");
+MODULE_LICENSE("GPL");
--
1.7.10
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
