Le 05/22/2012 04:13 PM, Jean-Christophe PLAGNIOL-VILLARD a écrit :
On 12:09 Tue 22 May , ludovic.desroc...@atmel.com wrote:
From: Ludovic Desroches<ludovic.desroc...@atmel.com>
Add nodes for mci controllers.
Signed-off-by: Ludovic Desroches<ludovic.desroc...@atmel.com>
---
arch/arm/boot/dts/at91sam9g20.dtsi | 12 ++++++++++++
arch/arm/boot/dts/at91sam9g25ek.dts | 16 ++++++++++++++++
arch/arm/boot/dts/at91sam9g45.dtsi | 24 ++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9m10g45ek.dts | 17 +++++++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 24 ++++++++++++++++++++++++
5 files changed, 93 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi
b/arch/arm/boot/dts/at91sam9g20.dtsi
index 773ef48..6a28bfe 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -197,6 +197,18 @@
interrupts =<10 4>;
status = "disabled";
};
+
+ mmc0: mmc@fffa800 {
+ compatible = "atmel,hsmci";
+ reg =<0xfffa800 0x600>;
+ interrupts =<9 4>;
+ status = "disabled";
+ #address-cells =<1>;
+ #size-cells =<0>;
+ slot@0 {
+ reg =<0>;
+ };
+ };
this need to be in 9260.dtsi
if you add the board too plese add all of them
or seperate the commits
I based it on 3.4 so 9260.dtsi was not present. Nicolas gave me a new
branch with it so I will add mmc node to 9260.
Regards
Ludovic
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss