Added device tree support for omap musb driver and updated the Documentation with device tree binding information.
Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com> --- Documentation/devicetree/bindings/usb/omap-usb.txt | 34 +++++++++++- drivers/usb/musb/omap2430.c | 54 ++++++++++++++++++++ 2 files changed, 87 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 80a28c9..39cdffb 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -1,4 +1,4 @@ -OMAP USB PHY +OMAP USB PHY AND GLUE OMAP USB2 PHY @@ -14,3 +14,35 @@ usb2phy@0x4a0ad080 { compatible = "ti,omap-usb2"; reg = <0x4a0ad080 0x58>; }; + +OMAP MUSB GLUE + - compatible : Should be "ti,musb-omap2430" + - ti,hwmods : must be "usb_otg_hs" + - multipoint : Should be "1" indicating the musb controller supports + multipoint. This is a MUSB configuration-specific setting. + - num_eps : Specifies the number of endpoints. This is also a + MUSB configuration-specific setting. Should be set to "16" + - ram_bits : Specifies the ram address size. Should be set to "12" + - interface_type : This is a board specific setting to describe the type of + interface between the controller and the phy. It should be "0" or "1" + specifying ULPI and UTMI respectively. + - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" + represents PERIPHERAL. + - power : Should be "50". This signifies the controller can supply upto + 100mA when operating in host mode. + +SOC specific device node entry +usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = "ti,musb-omap2430"; + ti,hwmods = "usb_otg_hs"; + multipoint = <1>; + num_eps = <16>; + ram_bits = <12>; +}; + +Board specific device node entry +&usb_otg_hs { + interface_type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index addbebf..5db228f 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/pm_runtime.h> @@ -469,8 +470,11 @@ static u64 omap2430_dmamask = DMA_BIT_MASK(32); static int __devinit omap2430_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; + struct omap_musb_board_data *data; struct platform_device *musb; struct omap2430_glue *glue; + struct device_node *np = pdev->dev.of_node; + struct musb_hdrc_config *config; struct resource *res; int ret = -ENOMEM; @@ -500,6 +504,42 @@ static int __devinit omap2430_probe(struct platform_device *pdev) if (glue->control_otghs == NULL) dev_dbg(&pdev->dev, "Failed to obtain control memory\n"); + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, + "failed to allocate musb platfrom data\n"); + ret = -ENOMEM; + goto err1; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, + "failed to allocate musb board data\n"); + ret = -ENOMEM; + goto err1; + } + + config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, + "failed to allocate musb hdrc config\n"); + goto err1; + } + + of_property_read_u32(np, "mode", (u32 *)&pdata->mode); + of_property_read_u32(np, "interface_type", + (u32 *)&data->interface_type); + of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits); + of_property_read_u32(np, "power", (u32 *)&pdata->power); + config->multipoint = of_property_read_bool(np, "multipoint"); + + pdata->board_data = data; + pdata->config = config; + } + pdata->platform_ops = &omap2430_ops; platform_set_drvdata(pdev, glue); @@ -597,12 +637,26 @@ static struct dev_pm_ops omap2430_pm_ops = { #define DEV_PM_OPS NULL #endif +#ifdef CONFIG_OF +static const struct of_device_id omap2430_id_table[] = { + { + .compatible = "ti,omap4-musb" + }, + { + .compatible = "ti,omap3-musb" + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap2430_id_table); +#endif + static struct platform_driver omap2430_driver = { .probe = omap2430_probe, .remove = __devexit_p(omap2430_remove), .driver = { .name = "musb-omap2430", .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap2430_id_table), }, }; -- 1.7.9.5 _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss