Modify c_can device names from *_CAN_DEVTYPE to BOSCH_*_CAN to make
use of same names for array indexes in c_can_id_table[] as well as
device names.
This patch also add indexes to c_can_id_table array.
Signed-off-by: AnilKumar Ch <anilku...@ti.com>
---
drivers/net/can/c_can/c_can.h | 5 +++--
drivers/net/can/c_can/c_can_pci.c | 6 +++---
drivers/net/can/c_can/c_can_platform.c | 18 ++++++++++--------
3 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 01a7049..4e56baa 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -143,8 +143,9 @@ static const u16 reg_map_d_can[] = {
};
enum c_can_dev_id {
- C_CAN_DEVTYPE,
- D_CAN_DEVTYPE,
+ BOSCH_C_CAN_PLATFORM,
+ BOSCH_C_CAN,
+ BOSCH_D_CAN,
};
/* c_can private data structure */
diff --git a/drivers/net/can/c_can/c_can_pci.c
b/drivers/net/can/c_can/c_can_pci.c
index 1011146..3d7830b 100644
--- a/drivers/net/can/c_can/c_can_pci.c
+++ b/drivers/net/can/c_can/c_can_pci.c
@@ -120,10 +120,10 @@ static int __devinit c_can_pci_probe(struct pci_dev *pdev,
/* Configure CAN type */
switch (c_can_pci_data->type) {
- case C_CAN_DEVTYPE:
+ case BOSCH_C_CAN:
priv->regs = reg_map_c_can;
break;
- case D_CAN_DEVTYPE:
+ case BOSCH_D_CAN:
priv->regs = reg_map_d_can;
priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
break;
@@ -192,7 +192,7 @@ static void __devexit c_can_pci_remove(struct pci_dev *pdev)
}
static struct c_can_pci_data c_can_sta2x11= {
- .type = C_CAN_DEVTYPE,
+ .type = BOSCH_C_CAN,
.reg_align = C_CAN_REG_ALIGN_32,
.freq = 52000000, /* 52 Mhz */
};
diff --git a/drivers/net/can/c_can/c_can_platform.c
b/drivers/net/can/c_can/c_can_platform.c
index 6ff7ad0..5c46d1c 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -116,7 +116,7 @@ static int __devinit c_can_plat_probe(struct
platform_device *pdev)
priv = netdev_priv(dev);
id = platform_get_device_id(pdev);
switch (id->driver_data) {
- case C_CAN_DEVTYPE:
+ case BOSCH_C_CAN:
priv->regs = reg_map_c_can;
switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
case IORESOURCE_MEM_32BIT:
@@ -130,7 +130,7 @@ static int __devinit c_can_plat_probe(struct
platform_device *pdev)
break;
}
break;
- case D_CAN_DEVTYPE:
+ case BOSCH_D_CAN:
priv->regs = reg_map_d_can;
priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
@@ -196,15 +196,17 @@ static int __devexit c_can_plat_remove(struct
platform_device *pdev)
}
static const struct platform_device_id c_can_id_table[] = {
- {
+ [BOSCH_C_CAN_PLATFORM] = {
.name = KBUILD_MODNAME,
- .driver_data = C_CAN_DEVTYPE,
- }, {
+ .driver_data = BOSCH_C_CAN,
+ },
+ [BOSCH_C_CAN] = {
.name = "c_can",
- .driver_data = C_CAN_DEVTYPE,
- }, {
+ .driver_data = BOSCH_C_CAN,
+ },
+ [BOSCH_D_CAN] = {
.name = "d_can",
- .driver_data = D_CAN_DEVTYPE,
+ .driver_data = BOSCH_D_CAN,
}, {
}
};
--
1.7.9.5
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
