> diff --git a/arch/arm/mach-kirkwood/board-dnskw.c > b/arch/arm/mach-kirkwood/board-dnskw.c > index 4ab3506..e202a07 100644 > --- a/arch/arm/mach-kirkwood/board-dnskw.c > +++ b/arch/arm/mach-kirkwood/board-dnskw.c > @@ -67,29 +67,6 @@ static unsigned int dnskw_mpp_config[] __initdata = { > 0 > }; > > -/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ > -static struct gpio_fan_speed dnskw_fan_speed[] = { > - { 0, 0 }, > - { 3000, 1 }, > - { 6000, 2 }, > -}; > -static unsigned dnskw_fan_pins[] = {46, 45}; > - > -static struct gpio_fan_platform_data dnskw_fan_data = { > - .num_ctrl = ARRAY_SIZE(dnskw_fan_pins), > - .ctrl = dnskw_fan_pins, > - .num_speed = ARRAY_SIZE(dnskw_fan_speed), > - .speed = dnskw_fan_speed, > -}; > - > -static struct platform_device dnskw_fan_device = { > - .name = "gpio-fan", > - .id = -1, > - .dev = { > - .platform_data = &dnskw_fan_data, > - }, > -}; > - > static void dnskw_power_off(void) > { > gpio_set_value(36, 1); > @@ -114,8 +91,6 @@ void __init dnskw_init(void) > kirkwood_ehci_init(); > kirkwood_ge00_init(&dnskw_ge00_data); > > - platform_device_register(&dnskw_fan_device); > - > /* Register power-off GPIO. */ > if (gpio_request(36, "dnskw:power:off") == 0 > && gpio_direction_output(36, 0) == 0) > -- > 1.7.10.4 >
Hi Jamie Minor point. I expect you can remove the header file gpio-fan.h. There are also a few other headers files which can be removed, but i suggest you do this in a separate cleanup patch. I think ata_platform.h, input.h, leds.h, map.h, bridge-regs.h and maybe also kirkwood.h are no longer needed. Andrew _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss