Add lis331dlh device tree data to am335x-evm.dts. In AM335x EVM lis331dlh accelerometer is connected to I2C2 bus. So this patch change the status to "okay" to use I2C2 bus. Also added all the required platform data to am335x-evm.
Signed-off-by: AnilKumar Ch <anilku...@ti.com> --- arch/arm/boot/dts/am335x-evm.dts | 42 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 9fb59c5..9e5a878 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -47,6 +47,15 @@ }; }; + i2c2: i2c@4802a000 { + status = "okay"; + clock-frequency = <400000>; + + lis331dlh: lis331dlh@18 { + reg = <0x18>; + }; + }; + dcan1: d_can@481d0000 { status = "okay"; pinctrl-names = "default"; @@ -61,6 +70,39 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; +}; + +&lis331dlh { + compatible = "st,lis3lv02d-i2c"; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; }; /include/ "tps65910.dtsi" -- 1.7.9.5 _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss