On Thu, Nov 15, 2012 at 13:52:30, Dmitry Torokhov wrote:
> Hi AnilKumar,
> 
> On Thu, Nov 15, 2012 at 07:07:33AM +0000, AnilKumar, Chimata wrote:
> > On Sun, Nov 11, 2012 at 08:05:18, Rob Herring wrote:
> > > On 11/10/2012 03:40 PM, AnilKumar Ch wrote:
> > > > Add device tree support to matrix keypad driver and usage details
> > > > are added to device tree documentation. Driver was tested on AM335x
> > > > EVM.
> > > > 
> > > > Signed-off-by: AnilKumar Ch <anilku...@ti.com>
> > > 
> > > Acked-by: Rob Herring <rob.herr...@calxeda.com>
> > 
> > Hi Dmitry,
> > 
> > If there are no further comments on this patch, could you please
> > take this in?
> 
> Actually, could you please try the version below? Note that it needs
> changes to matrix_keypad_build_keymap() found in 'next' branch of my
> tree (to allocate keymap if caller did not supply it).
> 

Hi Dmitry,

Thanks for the patch. Minor fix should be required.

> 
> 
> Input: matrix-keypad - add device tree support
> 
> From: AnilKumar Ch <anilku...@ti.com>
> 
> Add device tree support to matrix keypad driver and usage details
> are added to device tree documentation. Driver was tested on AM335x
> EVM.
> 
> Signed-off-by: AnilKumar Ch <anilku...@ti.com>
> Signed-off-by: Dmitry Torokhov <dmitry.torok...@gmail.com>
> ---
>  .../bindings/input/gpio-matrix-keypad.txt          |   46 ++++++++
>  drivers/input/keyboard/matrix_keypad.c             |  119 
> ++++++++++++++++----
>  2 files changed, 143 insertions(+), 22 deletions(-)
>  create mode 100644 
> Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt 
> b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
> new file mode 100644
> index 0000000..ead641c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
> @@ -0,0 +1,46 @@
> +* GPIO driven matrix keypad device tree bindings
> +
> +GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
> +The matrix keypad supports multiple row and column lines, a key can be
> +placed at each intersection of a unique row and a unique column. The matrix
> +keypad can sense a key-press and key-release by means of GPIO lines and
> +report the event using GPIO interrupts to the cpu.
> +
> +Required Properties:
> +- compatible:                Should be "gpio-matrix-keypad"
> +- row-gpios:         List of gpios used as row lines. The gpio specifier
> +                     for this property depends on the gpio controller to
> +                     which these row lines are connected.
> +- col-gpios:         List of gpios used as column lines. The gpio specifier
> +                     for this property depends on the gpio controller to
> +                     which these column lines are connected.
> +- linux,keymap:              The definition can be found at
> +                     bindings/input/matrix-keymap.txt
> +
> +Optional Properties:
> +- linux,no-autorepeat:       do no enable autorepeat feature.
> +- linux,wakeup:              use any event on keypad as wakeup event.
> +- debounce-delay-ms: debounce interval in milliseconds
> +- col-scan-delay-us: delay, measured in microseconds, that is needed
> +                     before we can scan keypad after activating column gpio
> +
> +Example:
> +     matrix-keypad {
> +             compatible = "gpio-matrix-keypad";
> +             debounce-delay-ms = <5>;
> +             col-scan-delay-us = <2>;
> +
> +             row-gpios = <&gpio2 25 0
> +                          &gpio2 26 0
> +                          &gpio2 27 0>;
> +
> +             col-gpios = <&gpio2 21 0
> +                          &gpio2 22 0>;
> +
> +             linux,keymap = <0x0000008B
> +                             0x0100009E
> +                             0x02000069
> +                             0x0001006A
> +                             0x0101001C
> +                             0x0201006C>;
> +     };
> diff --git a/drivers/input/keyboard/matrix_keypad.c 
> b/drivers/input/keyboard/matrix_keypad.c
> index 18b7237..ebf6e8f 100644
> --- a/drivers/input/keyboard/matrix_keypad.c
> +++ b/drivers/input/keyboard/matrix_keypad.c
> @@ -23,6 +23,9 @@
>  #include <linux/gpio.h>
>  #include <linux/input/matrix_keypad.h>
>  #include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_platform.h>
>  
>  struct matrix_keypad {
>       const struct matrix_keypad_platform_data *pdata;
> @@ -37,8 +40,6 @@ struct matrix_keypad {
>       bool scan_pending;
>       bool stopped;
>       bool gpio_all_disabled;
> -
> -     unsigned short keycodes[];
>  };
>  
>  /*
> @@ -118,6 +119,7 @@ static void matrix_keypad_scan(struct work_struct *work)
>       struct matrix_keypad *keypad =
>               container_of(work, struct matrix_keypad, work.work);
>       struct input_dev *input_dev = keypad->input_dev;
> +     const unsigned short *keycodes = input_dev->keycode;
>       const struct matrix_keypad_platform_data *pdata = keypad->pdata;
>       uint32_t new_state[MATRIX_MAX_COLS];
>       int row, col, code;
> @@ -153,7 +155,7 @@ static void matrix_keypad_scan(struct work_struct *work)
>                       code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
>                       input_event(input_dev, EV_MSC, MSC_SCAN, code);
>                       input_report_key(input_dev,
> -                                      keypad->keycodes[code],
> +                                      keycodes[code],
>                                        new_state[col] & (1 << row));
>               }
>       }
> @@ -394,33 +396,95 @@ static void matrix_keypad_free_gpio(struct 
> matrix_keypad *keypad)
>               gpio_free(pdata->col_gpios[i]);
>  }
>  
> +#ifdef CONFIG_OF
> +static struct matrix_keypad_platform_data * __devinit
> +matrix_keypad_parse_dt(struct device *dev)
> +{
> +     struct matrix_keypad_platform_data *pdata;
> +     struct device_node *np = dev->of_node;
> +     unsigned int *gpios;
> +     int i;
> +
> +     if (!np) {
> +             dev_err(dev, "device lacks DT data\n");
> +             return ERR_PTR(-ENODEV);
> +     }
> +
> +     pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> +     if (!pdata) {
> +             dev_err(dev, "could not allocate memory for platform data\n");
> +             return ERR_PTR(-ENOMEM);
> +     }
> +
> +     pdata->num_row_gpios = of_gpio_named_count(np, "row-gpios");
> +     pdata->num_col_gpios = of_gpio_named_count(np, "col-gpios");
> +     if (!pdata->num_row_gpios || !pdata->num_col_gpios) {
> +             dev_err(dev, "number of keypad rows/columns not specified\n");
> +             return ERR_PTR(-EINVAL);
> +     }
> +
> +     if (of_get_property(np, "linux,no-autorepeat", NULL))
> +             pdata->no_autorepeat = true;
> +     if (of_get_property(np, "linux,wakeup", NULL))
> +             pdata->wakeup = true;
> +     if (of_get_property(np, "gpio-activelow", NULL))
> +             pdata->active_low = true;
> +
> +     of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms);
> +     of_property_read_u32(np, "col-scan-delay-us",
> +                                             &pdata->col_scan_delay_us);
> +
> +     gpios = devm_kzalloc(dev,
> +                          sizeof(unsigned int) *

We can make above two lines into single. 

> +                             (pdata->num_row_gpios + pdata->num_col_gpios),
> +                          GFP_KERNEL);
> +     if (gpios) {

Above line should be replace with

if (!gpios) {

With this change, I have tested the driver. I will resubmit the patch
with this change.

Thanks
AnilKumar

> +             dev_err(dev, "could not allocate memory for gpios\n");
> +             return ERR_PTR(-ENOMEM);
> +     }
> +
> +     for (i = 0; i < pdata->num_row_gpios; i++)
> +             gpios[i] = of_get_named_gpio(np, "row-gpios", i);
> +
> +     for (i = 0; i < pdata->num_col_gpios; i++)
> +             gpios[pdata->num_row_gpios + i] =
> +                     of_get_named_gpio(np, "col-gpios", i);
> +
> +     pdata->row_gpios = gpios;
> +     pdata->col_gpios = &gpios[pdata->num_row_gpios];
> +
> +     return pdata;
> +}
> +#else
> +static inline struct matrix_keypad_platform_data *
> +matrix_keypad_parse_dt(struct device *dev)
> +{
> +     dev_err(dev, "no platform data defined\n");
> +
> +     return ERR_PTR(-EINVAL);
> +}
> +#endif
> +
>  static int __devinit matrix_keypad_probe(struct platform_device *pdev)
>  {
>       const struct matrix_keypad_platform_data *pdata;
> -     const struct matrix_keymap_data *keymap_data;
>       struct matrix_keypad *keypad;
>       struct input_dev *input_dev;
> -     unsigned int row_shift;
> -     size_t keymap_size;
>       int err;
>  
> -     pdata = pdev->dev.platform_data;
> +     pdata = dev_get_platdata(&pdev->dev);
>       if (!pdata) {
> -             dev_err(&pdev->dev, "no platform data defined\n");
> -             return -EINVAL;
> -     }
> -
> -     keymap_data = pdata->keymap_data;
> -     if (!keymap_data) {
> +             pdata = matrix_keypad_parse_dt(&pdev->dev);
> +             if (IS_ERR(pdata)) {
> +                     dev_err(&pdev->dev, "no platform data defined\n");
> +                     return PTR_ERR(pdata);
> +             }
> +     } else if (!pdata->keymap_data) {
>               dev_err(&pdev->dev, "no keymap data defined\n");
>               return -EINVAL;
>       }
>  
> -     row_shift = get_count_order(pdata->num_col_gpios);
> -     keymap_size = (pdata->num_row_gpios << row_shift) *
> -                     sizeof(keypad->keycodes[0]);
> -     keypad = kzalloc(sizeof(struct matrix_keypad) + keymap_size,
> -                      GFP_KERNEL);
> +     keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
>       input_dev = input_allocate_device();
>       if (!keypad || !input_dev) {
>               err = -ENOMEM;
> @@ -429,7 +493,7 @@ static int __devinit matrix_keypad_probe(struct 
> platform_device *pdev)
>  
>       keypad->input_dev = input_dev;
>       keypad->pdata = pdata;
> -     keypad->row_shift = row_shift;
> +     keypad->row_shift = get_count_order(pdata->num_col_gpios);
>       keypad->stopped = true;
>       INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
>       spin_lock_init(&keypad->lock);
> @@ -440,12 +504,14 @@ static int __devinit matrix_keypad_probe(struct 
> platform_device *pdev)
>       input_dev->open         = matrix_keypad_start;
>       input_dev->close        = matrix_keypad_stop;
>  
> -     err = matrix_keypad_build_keymap(keymap_data, NULL,
> +     err = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
>                                        pdata->num_row_gpios,
>                                        pdata->num_col_gpios,
> -                                      keypad->keycodes, input_dev);
> -     if (err)
> +                                      NULL, input_dev);
> +     if (err) {
> +             dev_err(&pdev->dev, "failed to build keymap\n");
>               goto err_free_mem;
> +     }
>  
>       if (!pdata->no_autorepeat)
>               __set_bit(EV_REP, input_dev->evbit);
> @@ -488,6 +554,14 @@ static int __devexit matrix_keypad_remove(struct 
> platform_device *pdev)
>       return 0;
>  }
>  
> +#ifdef CONFIG_OF
> +static const struct of_device_id matrix_keypad_dt_match[] = {
> +     { .compatible = "gpio-matrix-keypad" },
> +     { }
> +};
> +MODULE_DEVICE_TABLE(of, matrix_keypad_dt_match);
> +#endif
> +
>  static struct platform_driver matrix_keypad_driver = {
>       .probe          = matrix_keypad_probe,
>       .remove         = __devexit_p(matrix_keypad_remove),
> @@ -495,6 +569,7 @@ static struct platform_driver matrix_keypad_driver = {
>               .name   = "matrix-keypad",
>               .owner  = THIS_MODULE,
>               .pm     = &matrix_keypad_pm_ops,
> +             .of_match_table = of_match_ptr(matrix_keypad_dt_match),
>       },
>  };
>  module_platform_driver(matrix_keypad_driver);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to