On 11/14/2012 07:08 PM, AnilKumar Ch wrote: > Add a new address space/memory resource to d_can device tree node. D_CAN > RAM initialization is achieved through RAMINIT register which is part of > AM33XX control module address space. D_CAN RAM init or de-init should be > done by writing instance corresponding value to control module register. > > Till we have a separate control module driver to write to control module, > d_can driver will handle the register writes to control module by itself. > So a new address space to represent this control module register is added > to d_can driver. > > Signed-off-by: AnilKumar Ch <anilku...@ti.com>
This does not apply to net-next/master: Applying: ARM: dts: AM33XX: Add memory resource to d_can node error: patch failed: arch/arm/boot/dts/am33xx.dtsi:227 error: arch/arm/boot/dts/am33xx.dtsi: patch does not apply Patch failed at 0003 ARM: dts: AM33XX: Add memory resource to d_can node Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
_______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss
