On Mon, 10 Dec 2012 09:21:51 -0600, Rob Herring <robherri...@gmail.com> wrote: > On 12/10/2012 09:05 AM, Michal Simek wrote: > > On 12/10/2012 03:26 PM, Rob Herring wrote: > >> On 12/10/2012 06:20 AM, Michal Simek wrote: > >>> Hi Grant and others, > >>> > >>> I have a question regarding number of cells in ranges property > >>> for pci and pcie nodes. > >>> > >>> Linux pci/pcie powerpc DTSes contain 7 cells (xpedite5370.dts, > >>> sequoia.dts, etc) > >>> but also 6 cells format too (mpc832x_mds.dts) > >>> > >>> Here is shown 6 cells ranges format and describe > >>> http://devicetree.org/Device_Tree_Usage#PCI_Host_Bridge > >>> > >>> And also in documentation in the linux > >>> Documentation/devicetree/bindings/pci/83xx-512x-pci.txt > >>> > >>> Both format uses: > >>> #size-cells = <2>; > >>> #address-cells = <3>; > >>> > >>> What is valid format? > >> > >> Both. 7 cells are valid when the host (parent) bus is 64-bit and 6 cells > >> are valid when the host bus is 32-bit. The ranges property is <<child > >> address> <parent address> <size>>. The parent address #address-cells is > >> taken from the parent node. > > > > Ok. Got it. > > > > Here is what we use on zynq and microblaze - both 32bit which should be > > fine. > > > > ps7_axi_interconnect_0: axi@0 { > > #address-cells = <1>; > > #size-cells = <1>; > > axi_pcie_0: axi-pcie@50000000 { > > #address-cells = <3>; > > #size-cells = <2>; > > compatible = "xlnx,axi-pcie-1.05.a"; > > ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >; > > ... > > } > > } > > > > What I am wondering is pci_process_bridge_OF_ranges() at > > arch/powerpc/kernel/pci-common.c > > where there are used some hardcoded values which should be probably > > loaded from device-tree. > > > > For example: > > 683 int np = pna + 5; > > ... > > 702 pci_addr = of_read_number(ranges + 1, 2); > > 703 cpu_addr = of_translate_address(dev, ranges + 3); > > 704 size = of_read_number(ranges + pna + 3, 2); > > These would always be correct whether you have 6 or 7 cells. pna is the > parent bus address cells size. The pci address is fixed at 3 cells. > > > > > > > Unfortunately we have copied it to microblaze. > > I look at the PCI DT code in powerpc and see a whole bunch of code that > seems like it should be common. The different per arch pci structs > complicates that. No one has really gotten to looking at PCI DT on ARM > yet except you and Thierry for Tegra. We definitely don't want to create > a 3rd copy. Starting the process of moving it to something like > drivers/pci/pci-of.c would be great.
A lot of it should be common. The microblaze code is a copy of the powerpc version. I'll strongly nack any attempt to add a third! :-) drivers/pci/pci-of.c would be good. I'd also accept drivers/of/pci.c which might actually be a good idea in the short term so that it gets appropriate supervision while being generalized before being moved into the pci directory. g. _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss