Hi Rob, On Jan 6, 2013, at 4:24 AM, Rob Landley wrote:
> On 01/04/2013 01:31:10 PM, Pantelis Antoniou wrote: >> Introduce DT overlay support. >> Using this functionality it is possible to dynamically overlay a part of >> the kernel's tree with another tree that's been dynamically loaded. >> It is also possible to remove node and properties. >> Signed-off-by: Pantelis Antoniou <pa...@antoniou-consulting.com> > > Just commenting on the documentation a bit... > >> --- >> Documentation/devicetree/overlay-notes.txt | 179 +++++++ >> drivers/of/Kconfig | 10 + >> drivers/of/Makefile | 1 + >> drivers/of/overlay.c | 831 >> +++++++++++++++++++++++++++++ >> include/linux/of.h | 107 ++++ >> 5 files changed, 1128 insertions(+) >> create mode 100644 Documentation/devicetree/overlay-notes.txt >> create mode 100644 drivers/of/overlay.c >> diff --git a/Documentation/devicetree/overlay-notes.txt >> b/Documentation/devicetree/overlay-notes.txt >> new file mode 100644 >> index 0000000..5289cbb >> --- /dev/null >> +++ b/Documentation/devicetree/overlay-notes.txt >> @@ -0,0 +1,179 @@ >> +Device Tree Overlay Notes >> +------------------------- >> + >> +This document describes the implementation of the in-kernel >> +device tree overlay functionality residing in drivers/of/overlay.c and is a >> +companion document to Documentation/devicetree/dt-object-internal.txt[1] & >> +Documentation/devicetree/dynamic-resolution-notes.txt[2] >> + >> +How overlays work >> +----------------- >> + >> +A Device Tree's overlay purpose is to modify the kernel's live tree, and >> +have the modification affecting the state of the the kernel in a way that >> +is reflecting the changes. > > My wild guess here is this has something to do with hotplug support, but I > don't know if modules are expected to do this or if userspace does it and > modules respond... Could you give a couple sentences about the purpose and > potential users of this mechanism in the summary? > In a nutshell, the idea is that you have an unspecified method of detecting some kind of hardware interface(s) and you want to insert to the live tree the fragment that will enable your hardware to function. Which method to use is up to what comes naturally for each case. >> +Since the kernel mainly deals with devices, any new device node that result > > results > OK >> +in an active device should have it created while if the device node is >> either >> +disabled or removed all together, the affected device should be >> deregistered. > > I'm not following this bit. It looks like some test is missing between "while > if"? > I'll reword it to make it clearer. >> +Lets take an example where we have a foo board with the following base tree >> +which is taken from [1]. >> + >> +---- foo.dts >> ----------------------------------------------------------------- >> + /* FOO platform */ >> + / { >> + compatible = "corp,foo"; >> + >> + /* shared resources */ >> + res: res { >> + }; >> + >> + /* On chip peripherals */ >> + ocp: ocp { >> + /* peripherals that are always instantiated */ >> + peripheral1 { ... }; >> + } >> + }; >> +---- foo.dts >> ----------------------------------------------------------------- >> + >> +The overlay bar.dts, when loaded (and resolved as described in [2]) should >> + >> +---- bar.dts >> ----------------------------------------------------------------- >> +/plugin/; /* allow undefined label references and record them */ >> +/ { >> + .... /* various properties for loader use; i.e. part id etc. */ >> + fragment@0 { >> + target = <&ocp>; >> + __overlay__ { >> + /* bar peripheral */ >> + bar { >> + compatible = "corp,bar"; >> + ... /* various properties and child nodes */ >> + } >> + }; >> + }; >> +}; >> +---- bar.dts >> ----------------------------------------------------------------- >> + >> +result in foo+bar.dts >> + >> +---- foo+bar.dts >> ------------------------------------------------------------- >> + /* FOO platform + bar peripheral */ >> + / { >> + compatible = "corp,foo"; >> + >> + /* shared resources */ >> + res: res { >> + }; >> + >> + /* On chip peripherals */ >> + ocp: ocp { >> + /* peripherals that are always instantiated */ >> + peripheral1 { ... }; >> + >> + /* bar peripheral */ >> + bar { >> + compatible = "corp,bar"; >> + ... /* various properties and child nodes */ >> + } >> + } >> + }; >> +---- foo+bar.dts >> ------------------------------------------------------------- >> + >> +As a result of the the overlay, a new device node (bar) has been created >> +so a bar platform device will be registered and if a matching device driver >> +is loaded the device will be created as expected. > > Is this done by a module, or does doing this then trigger a hotplug event > that requests a module? (Or is this a syntax allowing a bootloader to collate > multiple device tree segments and then Linux links them when parsing the > device tree...?) This is the general way to support all of the above. The existing implementation is by a board specific loader, which I will post shortly. > >> +Overlay in-kernel API >> +--------------------- >> + >> +The steps typically required to get an overlay to work are as follows: >> + >> +1. Use of_build_overlay_info() to create an array of initialized and >> +ready to use of_overlay_info structures. >> +2. Call of_overlay() to apply the overlays declared in the array. >> +3. If the overlay needs to be removed, call of_overlay_revert(). >> +4. Finally release the memory taken by the overlay info array by >> +of_free_overlay_info(). >> + >> +/** >> + * of_build_overlay_info - Build an overlay info array >> + * @tree: Device node containing all the overlays >> + * @cntp: Pointer to where the overlay info count will be help >> + * @ovinfop: Pointer to the pointer of an overlay info structure. >> + * >> + * Helper function that given a tree containing overlay information, >> + * allocates and builds an overlay info array containing it, ready >> + * for use using of_overlay. >> + * >> + * Returns 0 on success with the @cntp @ovinfop pointers valid, >> + * while on error a negative error value is returned. >> + */ >> +int of_build_overlay_info(struct device_node *tree, >> + int *cntp, struct of_overlay_info **ovinfop); > > Copying the htmldocs info blocks into a Documentation text file means you > have to keep them in sync by hand. Possibly you want this documentation in a > docbook template instead? At this point in time, there's no such thing, since the rest of the code in that area doesn't do it. I know it's a chore to keep them in sync by hand, but if you go to the trouble of commenting, I thought I might as well make it in a form that can be used later. > >> +/** >> + * of_free_overlay_info - Free an overlay info array >> + * @count: Number of of_overlay_info's >> + * @ovinfo_tab: Array of overlay_info's to free >> + * >> + * Releases the memory of a previously allocate ovinfo array >> + * by of_build_overlay_info. >> + * Returns 0, or an error if the arguments are bogus. >> + */ >> +int of_free_overlay_info(int count, struct of_overlay_info *ovinfo_tab); >> + >> +/** >> + * of_overlay - Apply @count overlays pointed at by @ovinfo_tab >> + * @count: Number of of_overlay_info's >> + * @ovinfo_tab: Array of overlay_info's to apply >> + * >> + * Applies the overlays given, while handling all error conditions >> + * appropriately. Either the operation succeeds, or if it fails the >> + * live tree is reverted to the state before the attempt. >> + * Returns 0, or an error if the overlay attempt failed. >> + */ >> +int of_overlay(int count, struct of_overlay_info *ovinfo_tab); >> + >> +/** >> + * of_overlay_revert - Revert a previously applied overlay >> + * @count: Number of of_overlay_info's >> + * @ovinfo_tab: Array of overlay_info's to apply >> + * >> + * Revert a previous overlay. The state of the live tree >> + * is reverted to the one before the overlay. >> + * Returns 0, or an error if the overlay table is not given. >> + */ >> +int of_overlay_revert(int count, struct of_overlay_info *ovinfo_tab); >> + >> +Overlay DTS Format >> +------------------ >> + >> +The DTS of an overlay should have the following format: >> + >> +{ >> + /* ignored properties by the overlay */ >> + >> + fragment@0 { /* first child node */ >> + target=<phandle>; /* target of the overlay */ >> + __overlay__ { >> + property-a; /* add property-a to the target */ >> + -property-b; /* remove property-b from target */ >> + node-a { /* add to an existing, or create a >> node-a */ >> + ... >> + }; >> + -node-b { /* remove an existing node-b */ >> + ... >> + }; >> + }; >> + } >> + fragment@1 { /* second child node */ >> + ... >> + }; >> + /* more fragments follow */ >> +} >> + >> +It should be noted that the DT overlay format described is the one expected >> +by the of_build_overlay_info() function, which is a helper function. There >> +is nothing stopping someone coming up with his own DTS format and that will >> +end up filling in the fields of the of_overlay_info array. >> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig >> index f9a6193..964a1c2 100644 >> --- a/drivers/of/Kconfig >> +++ b/drivers/of/Kconfig >> @@ -92,4 +92,14 @@ config OF_RESOLVE >> Enable OF dynamic resolution support. This allows you to >> load Device Tree object fragments are run time. >> +config OF_OVERLAY >> + bool "OF overlay support" >> + depends on OF >> + select OF_DYNAMIC >> + select OF_DEVICE >> + select OF_RESOLVE >> + help >> + OpenFirmware overlay support. Allows you to modify on runtime the >> + live tree using overlays. > > "You" being... a module? The bootloader? A userspace program that just loaded > some firmware? A udev hook responding to a hotplug event? > A specific patchset which uses all of this will be forthcoming. As I said earlier, this is the infrastructure code than allows all of this. > Rob Regards -- Pantelis _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss