Hi Linus W,
On Tuesday 08 January 2013 01:02 PM, Laxman Dewangan wrote:
From: Pritesh Raithatha <praitha...@nvidia.com>
NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e.
rcv-sel and drive type.
rcv-sel: Select between High and Normal VIL/VIH receivers.
RCVR_SEL=1: High VIL/VIH
RCVR_SEL=0: Normal VIL/VIH
drv_type: Ouptput drive type:
33-50 ohm driver: 0x1
66-100ohm driver: 0x0
Add support of these parameters to be configure from DTS file.
Tegra20 and Tegra30 does not support this configuration and hence initialize
their
pinmux structure with reg = -1.
Originally written by Pritesh Raithatha.
Changes by ldewangan:
- remove drvtype_width as it is always 2.
- Better describe the change.
Signed-off-by: Pritesh Raithatha <praitha...@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewan...@nvidia.com>
Reviewed-by: Stephen Warren <swar...@nvidia.com>
---
Can you please review the series and let us know if any thing I can do
for closing this?
Thanks,
Laxman
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
