From: "Patil, Rachna" <rac...@ti.com>

Signed-off-by: Patil, Rachna <rac...@ti.com>
---
Changes in v4:
        Subnodes and their properties documentation added.
        Non-standard properties prefixed with vendor name.

 .../devicetree/bindings/mfd/ti_am335x_tscadc.txt   |   52 ++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti_am335x_tscadc.txt

diff --git a/Documentation/devicetree/bindings/mfd/ti_am335x_tscadc.txt 
b/Documentation/devicetree/bindings/mfd/ti_am335x_tscadc.txt
new file mode 100644
index 0000000..0100771
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti_am335x_tscadc.txt
@@ -0,0 +1,52 @@
+Texas Instruments - TSC / ADC multi-functional device
+
+ti_tscadc is a multi-function device with touchscreen and ADC on chip.
+This document describes the binding for mfd device.
+
+Required properties:
+- compatible: "ti,ti-tscadc"
+- reg: Specifies the address of MFD block
+- interrupts: IRQ line connected to the main SoC
+- interrupt-parent: The parent interrupt controller
+
+Optional properties:
+- ti,hwmods: Hardware information related to TSC/ADC MFD device
+
+Sub-nodes:
+Device                 Description
+------                 -----------
+tsc                    Touchscreen
+adc                    Analog to digital converter
+
+Sub-node device required properties:
+tsc:
+- ti,wires:  4/5/8 wire touchscreen support on the platform.
+- ti,x-plate-resistance: X plate resistance.
+- ti,steps-to-configure: A step is configured to read a single co-ordinate 
value,
+                       can be applied more number of times for better results.
+- ti,wire-config: Order for connecting wires on touchscreen.
+
+adc:
+- ti,adc-channels: Number of ADC channels used.
+
+Example:
+
+       tscadc: tscadc@44e0d000 {
+               compatible = "ti,ti-tscadc";
+               reg = <0x44e0d000 0x1000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <16>;
+               ti,hwmods = "adc_tsc";
+
+               tsc {
+                       ti,wires = <4>;
+                       ti,x-plate-resistance = <200>;
+                       ti,steps-to-configure = <5>;
+                       ti,wire-config = <0x00 0x11 0x22 0x33>;
+               };
+
+               adc {
+                       ti,adc-channels = <4>;
+               };
+       };
-- 
1.7.9.5

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to