On 02/03/2013 09:58 PM, Jonathan Cameron wrote: > On 02/03/2013 06:55 PM, Lars-Peter Clausen wrote: >> On 02/03/2013 06:30 PM, Tomasz Figa wrote: >>> On Sunday 03 of February 2013 09:01:07 Guenter Roeck wrote: >>>> On Sun, Feb 03, 2013 at 12:52:40PM +0100, Tomasz Figa wrote: >>>>> On Sunday 03 of February 2013 12:29:23 Lars-Peter Clausen wrote: >>>>>> On 02/03/2013 03:06 AM, Guenter Roeck wrote: >>>>>>> On Sun, Feb 03, 2013 at 02:30:24AM +0100, Tomasz Figa wrote: >>>>>>>> Hi Guenter, >>>>>>>> >>>>>>>> Some comments inline. >>>>>>>> >>>>>>>> On Saturday 02 of February 2013 16:59:40 Guenter Roeck wrote: >>>>>>>>> Provide bindings and parse OF data during initialization. >>>>>>>>> >>>>>>>>> Signed-off-by: Guenter Roeck <li...@roeck-us.net> >>>>>>>>> --- >>>>>>>>> - Documentation update per feedback >>>>>>>>> - Dropped io-channel-output-names from the bindings document. >>>>>>>>> The >>>>>>>>> property is not used in the code, and it is not entirely clear >>>>>>>>> what >>>>>>>>> it >>>>>>>>> would be used for. If there is a need for it, we can add it back >>>>>>>>> in >>>>>>>>> later on. >>>>>>>>> - Don't export OF specific API calls >>>>>>>>> - For OF support, no longer depend on iio_map >>>>>>>>> - Add #ifdef CONFIG_OF where appropriate, and ensure that the >>>>>>>>> code >>>>>>>>> still builds if it is not selected. >>>>>>>>> - Change iio_channel_get to take device pointer as argument >>>>>>>>> instead >>>>>>>>> of >>>>>>>>> device name. Retain old API as of_iio_channel_get_sys. >>>>>>>>> - iio_channel_get now works for both OF and non-OF >>>>>>>>> configurations. >>>>>>>>> >>>>>>>>> .../devicetree/bindings/iio/iio-bindings.txt | 76 >>>>>>>>> ++++++++ >>>>>>>>> drivers/iio/inkern.c | 186 >>>>>>>>> >>>>>>>>> ++++++++++++++++++++ 2 files changed, 262 insertions(+) >>>>>>>>> >>>>>>>>> create mode 100644 >>>>>>>>> >>>>>>>>> Documentation/devicetree/bindings/iio/iio-bindings.txt >>>>>>>>> >>>>>>>>> diff --git >>>>>>>>> a/Documentation/devicetree/bindings/iio/iio-bindings.txt >>>>>>>>> b/Documentation/devicetree/bindings/iio/iio-bindings.txt new >>>>>>>>> file >>>>>>>>> mode >>>>>>>>> 100644 >>>>>>>>> index 0000000..58df5f6 >>>>>>>>> --- /dev/null >>>>>>>>> +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt >>>>>>>>> @@ -0,0 +1,76 @@ >>>>>>>>> +This binding is a work-in-progress. It is derived from clock >>>>>>>>> bindings, >>>>>>>>> +and based on suggestions from Lars-Peter Clausen [1]. >>>>>>>>> + >>>>>>>>> +Sources of IIO channels can be represented by any node in the >>>>>>>>> device >>>>>>>>> +tree. Those nodes are designated as IIO providers. IIO >>>>>>>>> consumer >>>>>>>>> +nodes use a phandle and IIO specifier pair to connect IIO >>>>>>>>> provider >>>>>>>>> +outputs to IIO inputs. Similar to the gpio specifiers, an IIO >>>>>>>>> +specifier is an array of one or more cells identifying the IIO >>>>>>>>> +output on a device. The length of an IIO specifier is defined >>>>>>>>> by >>>>>>>>> the >>>>>>>>> +value of a #io-channel-cells property in the clock provider >>>>>>>>> node. >>>>>>>>> + >>>>>>>>> +[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2 >>>>>>>>> + >>>>>>>>> +==IIO providers== >>>>>>>>> + >>>>>>>>> +Required properties: >>>>>>>>> +#io-channel-cells: Number of cells in an IIO specifier; >>>>>>>>> Typically 0 >>>>>>>>> for nodes + with a single IIO output and 1 for nodes >>> with >>>>>>>>> multiple + IIO outputs. >>>>>>>>> + >>>>>>>>> +For example: >>>>>>>>> + >>>>>>>>> + adc: adc@35 { >>>>>>>>> + compatible = "maxim,max1139"; >>>>>>>>> + reg = <0x35>; >>>>>>>>> + #io-channel-cells = <1>; >>>>>>>>> + }; >>>>>>>>> + >>>>>>>>> +==IIO consumers== >>>>>>>>> + >>>>>>>>> +Required properties: >>>>>>>>> +io-channels: List of phandle and IIO specifier pairs, one >>> pair >>>>>>>>> + for each IIO input to the device. Note: if the >>>>>>>>> + IIO provider specifies '0' for #clock-cells, then >>>>>>>>> + only the phandle portion of the pair will appear. >>>>>>>>> + >>>>>>>>> +Optional properties: >>>>>>>>> +io-channel-names: >>>>>>>>> + List of IIO input name strings sorted in the same >>>>>>>>> + order as the io-channels property. Consumers drivers >>>>>>>>> + will use io-channel-names to match IIO input names >>>>>>>>> + with IIO specifiers. >>>>>>>>> +io-channel-ranges: >>>>>>>>> + Empty property indicating that child nodes can inherit >>>>> >>>>> named >>>>> >>>>>>>>> + IIO channels from this node. Useful for bus nodes to >>>>> >>>>> provide >>>>> >>>>>>>>> + and IIO channel to their children. >>>>>>>>> + >>>>>>>>> +For example: >>>>>>>>> + >>>>>>>>> + device { >>>>>>>>> + io-channels = <&adc 1>, <&ref 0>; >>>>>>>>> + io-channel-names = "vcc", "vdd"; >>>>>>>>> + }; >>>>>>>>> + >>>>>>>>> +This represents a device with two IIO inputs, named "vcc" and >>>>>>>>> "vdd". >>>>>>>>> +The vcc channel is connected to output 1 of the &adc device, >>>>>>>>> and >>>>>>>>> the >>>>>>>>> +vdd channel is connected to output 0 of the &ref device. >>>>>>>>> + >>>>>>>>> +==Example== >>>>>>>>> + >>>>>>>>> + adc: max1139@35 { >>>>>>>>> + compatible = "maxim,max1139"; >>>>>>>>> + reg = <0x35>; >>>>>>>>> + #io-channel-cells = <1>; >>>>>>>>> + }; >>>>>>>>> + >>>>>>>>> + ... >>>>>>>>> + >>>>>>>>> + iio_hwmon { >>>>>>>>> + compatible = "iio-hwmon"; >>>>>>>>> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, >>>>>>>>> + <&adc 3>, <&adc 4>, <&adc 5>, >>>>>>>>> + <&adc 6>, <&adc 7>, <&adc 8>, >>>>>>>>> + <&adc 9>, <&adc 10>, <&adc 11>; >>>>>>>>> + io-channel-names = "vcc", "vdd", "vref", "1.2V"; >>>>>>>>> + }; >>>>>>>>> diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c >>>>>>>>> index b289915..d48f2a8 100644 >>>>>>>>> --- a/drivers/iio/inkern.c >>>>>>>>> +++ b/drivers/iio/inkern.c >>>>>>>>> @@ -10,6 +10,7 @@ >>>>>>>>> >>>>>>>>> #include <linux/export.h> >>>>>>>>> #include <linux/slab.h> >>>>>>>>> #include <linux/mutex.h> >>>>>>>>> >>>>>>>>> +#include <linux/of.h> >>>>>>>>> >>>>>>>>> #include <linux/iio/iio.h> >>>>>>>>> #include "iio_core.h" >>>>>>>>> >>>>>>>>> @@ -92,6 +93,179 @@ static const struct iio_chan_spec >>>>>>>>> >>>>>>>>> return chan; >>>>>>>>> >>>>>>>>> } >>>>>>>>> >>>>>>>>> +#ifdef CONFIG_OF >>>>>>>>> + >>>>>>>>> +static int iio_dev_node_match(struct device *dev, void *data) >>>>>>>>> +{ >>>>>>>>> + return !strcmp(dev->type->name, "iio_device") && dev->of_node >>>>> >>>>> == >>>>> >>>>>>>> data; >>>>>>>> >>>>>>>> Hmm, do you need to check type name here? One device node should >>>>>>>> rather >>>>>>>> represent only one device, making node an unique identifier. >>>>>>>> >>>>>>>> It this is meant to be a sanity check, it could be done one time >>>>>>>> after >>>>>>>> finding the device. >>>>>>> >>>>>>> Hi Tomasz, >>>>>>> >>>>>>> This is what Lars had suggested earlier: >>>>>>>> Yes, use bus_find_device on iio_bus_type. A nice example how to >>>>>>>> use >>>>>>>> this to lookup device by of node is of_find_i2c_device_by_node. >>>>>>>> For >>>>>>>> IIO you also need to make sure that dev->type is iio_dev_type, >>>>>>>> since >>>>>>>> both devices and triggers are registered on the same bus. >>>>>>> >>>>>>> Is it really needed, or in other words would it be sufficient to >>>>>>> check >>>>>>> if of_node and data match each other ? Your reasoning makes sense >>>>>>> to >>>>>>> me, and I had thought about it as well, but I don't really know, >>>>>>> and >>>>>>> I don't know how I could test it and guarantee correctness either. >>>>>>> I'll be happy to take the strcmp() out if someone tells me that it >>>>>>> is >>>>>>> definitely not needed ... >>>>>> >>>>>> A IIO trigger and a IIO device may have the same of_node, e.g. if >>>>>> they >>>>>> both belong to the same physical device. But you don't need to do >>>>>> the >>>>>> strcmp just compare dev->type to iio_dev_type i.e. dev->type == >>>>>> &iio_dev_type. Although it doesn't really matter in practice first >>>>>> check for the of_node then check for the type, since the of_node >>>>>> will >>>>>> only match for a few devices at most, the type will match for quite >>>>>> a >>>>>> few. >>>>> >>>>> I must disagree. >>>>> >>>>> If you have two IIO devices provided by one physical device, then in >>>>> >>>>> device tree they should be represented as follows: >>>>> phys-dev@12345678 { >>>>> >>>>> compatible = "some-physical-device"; >>>>> /* ... */ >>>>> >>>>> my_trig: iio-trigger { >>>>> >>>>> /* ... */ >>>>> >>>>> }; >>>>> >>>>> my_dev: iio-device { >>>>> >>>>> /* ... */ >>>>> >>>>> }; >>>>> >>>>> }; >>>>> >>>>> Notice that phys-dev works here as an IIO bus on which its IIO devices >>>>> are available. This is related to the convention that single OF >>>>> device node represents single device, which would be violated >>>>> otherwise. >>>> >>>> Right now the iio device is a child of the physical device, and I am >>>> simply passing of_node on to it. guess you are saying that is not >>>> correct ? >>>> >>>> If so, what would be the correct approach ? Something like the following >>>> ? >>>> >>>> voltage-sensor@35 { >>>> compatible = "maxim,max1139"; >>>> reg = <0x35>; >>>> vcc-supply = <®_3p3v>; >>>> vref-supply = <®_3p3v>; >>>> >>>> max1139-iio: iio-device { >>>> device_type = "iio_device"; >>>> #io-channel-cells = <1>; >>>> }; >>>> }; >>>> >>>> and in the driver probe function: >>>> >>>> if (parent->of_node) >>>> iio_dev->dev.of_node = of_find_node_by_type(parent->of_node, >>>> "iio_device"); >>>> >>>> Another option would be to use of_find_compatible_node() and something >>>> like compatible = "iio-device"; >>>> in the iio-device node. >>> >>> A device node is defined as a node having compatible property. Other nodes >>> should be seen as helper nodes, which do not represent devices (although >>> they all have struct device_node in Linux). >>> >>> Also, AFAIK, device_type is a deprecated property used by some legacy >>> PowerPC machines and for current machines only compatible should be used. >>> >>> So I guess the approach with compatible would be appropriate here. >>> >>> However for physical devices providing only a single IIO device it might >>> be better to allow simpler specification, like: >>> >>> max1139-iio: voltage-sensor@35 { >>> compatible = "maxim,max1139", "iio_device"; >> >> I don't think this makes a lot of sense. First of all iio_device an >> artificial >> Linux term, while the device tree should describe the hardware. Secondly >> there >> is no generic iio driver which could match on a node with a "iio_device" >> compability string and stuff would just work. I mean we don't do >> >> compatible = "atmel,at91sam9260-i2c", "i2c-master"; >> >> or similar either. > Lars, what you say here doesn't cover one 'interesting' case. > > An iio_device has one aspect in which it is not artificial. It represents > a group of channels that may be sampled at 'one instance' on a given device.
I primarily meant the term IIO. - Lars _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss