This patch implements get/set of the phy settings via ethtool apis
Signed-off-by: Mugunthan V N <mugunthan...@ti.com>
---
Documentation/devicetree/bindings/net/cpsw.txt | 3 +++
drivers/net/ethernet/ti/cpsw.c | 32 ++++++++++++++++++++++++
include/linux/platform_data/cpsw.h | 1 +
3 files changed, 36 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt
b/Documentation/devicetree/bindings/net/cpsw.txt
index ecfdf75..8d61300 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -20,6 +20,7 @@ Required properties:
- cpts_clock_shift : Denominator to convert input clock ticks into
nanoseconds
- phy_id : Specifies slave phy id
- mac-address : Specifies slave MAC address
+- ethtool-active-slave : Specifies the slave to use for ethtool command
Optional properties:
- ti,hwmods : Must be "cpgmac0"
@@ -50,6 +51,7 @@ Examples:
cpts_active_slave = <0>;
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
+ ethtool-active-slave = <0>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
/* Filled in by U-Boot */
@@ -76,6 +78,7 @@ Examples:
cpts_active_slave = <0>;
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
+ ethtool-active-slave = <0>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
/* Filled in by U-Boot */
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 01ffbc4..fa91eec 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1244,12 +1244,41 @@ static int cpsw_get_ts_info(struct net_device *ndev,
return 0;
}
+#define cpsw_slave_phy_index(priv) \
+ ((priv->data.dual_emac) ? priv->emac_port : \
+ priv->data.ethtool_active_slave)
+
+static int cpsw_get_settings(struct net_device *ndev,
+ struct ethtool_cmd *ecmd)
+{
+ struct cpsw_priv *priv = netdev_priv(ndev);
+ int slave_no = cpsw_slave_phy_index(priv);
+
+ if (priv->slaves[slave_no].phy)
+ return phy_ethtool_gset(priv->slaves[slave_no].phy, ecmd);
+ else
+ return -EOPNOTSUPP;
+}
+
+static int cpsw_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
+{
+ struct cpsw_priv *priv = netdev_priv(ndev);
+ int slave_no = cpsw_slave_phy_index(priv);
+
+ if (priv->slaves[slave_no].phy)
+ return phy_ethtool_sset(priv->slaves[slave_no].phy, ecmd);
+ else
+ return -EOPNOTSUPP;
+}
+
static const struct ethtool_ops cpsw_ethtool_ops = {
.get_drvinfo = cpsw_get_drvinfo,
.get_msglevel = cpsw_get_msglevel,
.set_msglevel = cpsw_set_msglevel,
.get_link = ethtool_op_get_link,
.get_ts_info = cpsw_get_ts_info,
+ .get_settings = cpsw_get_settings,
+ .set_settings = cpsw_set_settings,
};
static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv,
@@ -1346,6 +1375,9 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
if (!of_property_read_u32(node, "dual_emac", &prop))
data->dual_emac = prop;
+ if (!of_property_read_u32(node, "ethtool-active-slave", &prop))
+ data->ethtool_active_slave = prop;
+
/*
* Populate all the child nodes here...
*/
diff --git a/include/linux/platform_data/cpsw.h
b/include/linux/platform_data/cpsw.h
index 798fb80..e87e5cb 100644
--- a/include/linux/platform_data/cpsw.h
+++ b/include/linux/platform_data/cpsw.h
@@ -39,6 +39,7 @@ struct cpsw_platform_data {
u32 mac_control; /* Mac control register */
u16 default_vlan; /* Def VLAN for ALE lookup in VLAN aware mode*/
bool dual_emac; /* Enable Dual EMAC mode */
+ u32 ethtool_active_slave; /* ethtool slave */
};
#endif /* __CPSW_H__ */
--
1.7.9.5
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
