On 3/14/2013 4:02 PM, Philip Avinash wrote: > Add EHRPWM and ECAP support build support for DAVINCI_DA850 platforms. > > Also, since DAVINCI platforms doesn't support TI-PWM-Subsystem module, > remove the select option for CONFIG_PWM_TIPWMSS. > > Also, update CONFIG_PWM_TIPWMSS compiler directive appropriately in > pwm-tipwmss.h to fix the below compiler error upon removal of > CONFIG_PWM_TIPWMSS for Davinci platforms. > > drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_probe': > drivers/pwm/pwm-tiecap.c:263:4: error: 'PWMSS_ECAPCLK_EN' undeclared > (first use in this function) > drivers/pwm/pwm-tiecap.c:263:4: note: each undeclared identifier > is reported only once for each function it appears in > drivers/pwm/pwm-tiecap.c:264:17: error: 'PWMSS_ECAPCLK_EN_ACK' > undeclared (first use in this function) > drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_remove': > drivers/pwm/pwm-tiecap.c:291:49: error: 'PWMSS_ECAPCLK_STOP_REQ' > undeclared (first use in this function) > make[2]: *** [drivers/pwm/pwm-tiecap.o] Error 1 > make[1]: *** [drivers/pwm] Error 2 > make: *** [drivers] Error 2 > > Signed-off-by: Philip Avinash <avinashphi...@ti.com>
> config PWM_TIECAP > tristate "ECAP PWM support" > - depends on SOC_AM33XX > - select PWM_TIPWMSS > + depends on SOC_AM33XX || ARCH_DAVINCI_DA850 Having such narrow dependencies is wrong. The same device is present on DaVinci DA830 too. A depends on should not be required at all since the driver should build on all architectures. But I have seen resistance to doing that since users don't like to see configuration options totally irrelevant for the architecture they are building for. So may be take a middle path and do 'depends on ARCH_ARM'? Thanks, Sekhar _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss
