On Tue, May 21, 2013 at 01:01:50AM +0200, Simon Baatz wrote:
> Signed-off-by: Simon Baatz <gmbno...@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi | 97
> +++++++++++++++++++++
> arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts | 40 +++++++++
> arch/arm/boot/dts/kirkwood-sheevaplug.dts | 45 ++++++++++
> 4 files changed, 184 insertions(+)
> create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
> create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
> create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b9f7121..e81a387 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -84,6 +84,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
> kirkwood-ns2max.dtb \
> kirkwood-ns2mini.dtb \
> kirkwood-nsa310.dtb \
> + kirkwood-sheevaplug.dtb \
> + kirkwood-sheevaplug-esata.dtb \
> kirkwood-topkick.dtb \
> kirkwood-ts219-6281.dtb \
> kirkwood-ts219-6282.dtb \
> diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
> b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
> new file mode 100644
> index 0000000..9d59475
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
> @@ -0,0 +1,97 @@
> +/*
> + * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs
> + *
> + * Copyright (C) 2013 Simon Baatz <gmbno...@gmail.com>
> + *
> + * Licensed under GPLv2
> + */
> +
> +/include/ "kirkwood.dtsi"
> +/include/ "kirkwood-6281.dtsi"
> +
> +/ {
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x20000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200n8 earlyprintk";
> + };
> +
> + ocp@f1000000 {
> + pinctrl: pinctrl@10000 {
> +
> + pmx_usb_power_enable: pmx-usb-power-enable {
> + marvell,pins = "mpp29";
> + marvell,function = "gpio";
> + };
> + pmx_led_red: pmx-led-red {
> + marvell,pins = "mpp46";
> + marvell,function = "gpio";
> + };
> + pmx_led_blue: pmx-led-blue {
> + marvell,pins = "mpp49";
> + marvell,function = "gpio";
> + };
> + pmx_sdio_cd: pmx-sdio-cd {
> + marvell,pins = "mpp44";
> + marvell,function = "gpio";
> + };
> + pmx_sdio_wp: pmx-sdio-wp {
> + marvell,pins = "mpp47";
> + marvell,function = "gpio";
> + };
> + };
> + serial@12000 {
> + status = "okay";
> + };
> +
> + nand@3000000 {
> + status = "okay";
> +
> + partition@0 {
> + label = "u-boot";
> + reg = <0x0000000 0x100000>;
> + };
> +
> + partition@100000 {
> + label = "uImage";
> + reg = <0x0100000 0x400000>;
> + };
> +
> + partition@500000 {
> + label = "root";
> + reg = <0x0500000 0x1fb00000>;
> + };
> + };
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + usb_power: regulator@1 {
> + compatible = "regulator-fixed";
> + reg = <1>;
> + regulator-name = "USB Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
> + gpio = <&gpio0 29 0>;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + health {
> + label = "sheevaplug:blue:health";
> + gpios = <&gpio1 17 1>;
> + linux,default-trigger = "default-on";
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
> b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
> new file mode 100644
> index 0000000..1c6946a
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
> @@ -0,0 +1,40 @@
> +/*
> + * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
> + *
> + * Copyright (C) 2013 Simon Baatz <gmbno...@gmail.com>
> + *
> + * Licensed under GPLv2
> + */
> +
> +/dts-v1/;
> +
> +/include/ "kirkwood-sheevaplug-common.dtsi"
> +
> +/ {
> + model = "Globalscale Technologies eSATA SheevaPlug";
> + compatible = "globalscale,sheevaplug-esata-rev13",
> "globalscale,sheevaplug-esata", "globalscale,sheevaplug",
> "marvell,kirkwood-88f6281", "marvell,kirkwood";
> +
> + ocp@f1000000 {
> + pinctrl: pinctrl@10000 {
> +
> + pinctrl-0 = < &pmx_nand &pmx_uart0
> + &pmx_usb_power_enable
> + &pmx_led_blue>;
> + pinctrl-names = "default";
> +
> + };
> +
> + sata@80000 {
> + status = "okay";
> + nr-ports = <2>;
> + };
> +
> + mvsdio@90000 {
> + pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
> + pinctrl-names = "default";
> + status = "okay";
> + cd-gpios = <&gpio1 12 1>;
> + wp-gpios = <&gpio1 15 0>;
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
> b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
> new file mode 100644
> index 0000000..f7684066
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
> @@ -0,0 +1,45 @@
> +/*
> + * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug
> + *
> + * Copyright (C) 2013 Simon Baatz <gmbno...@gmail.com>
> + *
> + * Licensed under GPLv2
> + */
> +
> +/dts-v1/;
> +
> +/include/ "kirkwood-sheevaplug-common.dtsi"
> +
> +/ {
> + model = "Globalscale Technologies SheevaPlug";
> + compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281",
> "marvell,kirkwood";
> +
> + ocp@f1000000 {
> + pinctrl: pinctrl@10000 {
> +
> + pinctrl-0 = < &pmx_nand &pmx_uart0
> + &pmx_usb_power_enable
> + &pmx_led_red
> + &pmx_led_blue>;
> + pinctrl-names = "default";
> +
> + };
> +
> + mvsdio@90000 {
> + pinctrl-0 = <&pmx_sdio>;
> + pinctrl-names = "default";
> + status = "okay";
> + /* No CD or WP GPIOs */
> + broken-cd;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + misc {
> + label = "sheevaplug:red:misc";
> + gpios = <&gpio1 14 1>;
> + };
> + };
> +};
> --
> 1.7.9.5
>
Hi Simon
Looks good
Acked-by: Andrew Lunn <and...@lunn.ch>
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
