On Thu, Jun 06, 2013 at 10:03:00AM +0200, Steffen Trumtrar wrote: > On Thu, May 30, 2013 at 09:50:12AM +0200, Steffen Trumtrar wrote: > > Add pwm driver for the NXP pca9685 16 channel pwm-led controller. > > > > The driver is really barebones at this stage. E.g. the OE' pin and > > therefore the corresponding registers are not supported. > > The driver was tested on a HW where this pin is tied to GND. > > > > Signed-off-by: Steffen Trumtrar <s.trumt...@pengutronix.de> > > --- > > Changes since v2: > > - s/pwm-pca9685-led/pwm-pca9685/g > > - replace DT properties with booleans > > - whitespace/blank line cleanup > > - add "depends on REGMAP_I2C" in Kconfig > > - rework code readability > > - add pwm_ops.free function > > - set SLEEP bit on request/free/remove > > > > Changes since v1: > > - fix typo in documentation example > > > > .../devicetree/bindings/pwm/nxp,pca9685-pwm.txt | 27 ++ > > drivers/pwm/Kconfig | 9 + > > drivers/pwm/Makefile | 1 + > > drivers/pwm/pwm-pca9685.c | 291 > > +++++++++++++++++++++ > > 4 files changed, 328 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt > > create mode 100644 drivers/pwm/pwm-pca9685.c > > > > Ping ?!
Applied with some small fixups, thanks. Thierry
pgptcajeOS_tu.pgp
Description: PGP signature
_______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss
