From: KV Sujith <sujit...@ti.com> - Add GPIO DT Data and pinmux for DA850 EVM. GPIO is configurable differently on different boards. So add GPIO pinmuxing in dts file. - Dependency: This patch is dependent on Grab-pin-control patch; https://patchwork.kernel.org/patch/2013751/
Signed-off-by: KV Sujith <sujit...@ti.com> Signed-off-by: Philip Avinash <avinashphi...@ti.com> --- arch/arm/boot/dts/da850-evm.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 5bce7cc..2c127ff 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -17,6 +17,20 @@ soc { pmx_core: pinmux@1c14120 { status = "okay"; + gpio_pins: pinmux_gpio_pins { + pinctrl-single,bits = < + /* GPIO2_4 GPIO2_6 */ + 0x18 0x00008080 0x0000f0f0 + /* GPIO2_8 GPIO2_15 */ + 0x14 0x80000008 0xf000000f + /* GPIO3_12 GPIO3_13 */ + 0x1C 0x00008800 0x0000ff00 + /* GPIO4_0 GPIO4_1 */ + 0x28 0x88000000 0xff000000 + /* GPIO6_9 GPIO6_10 GPIO6_13 */ + 0x34 0x08800800 0x0ff00f00 + >; + }; }; serial0: serial@1c42000 { status = "okay"; @@ -90,6 +104,11 @@ }; }; }; + gpio: gpio@1e26000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_pins>; + }; }; nand_cs3@62000000 { status = "okay"; -- 1.7.9.5 _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss