This patch adds board file that will be used to boot S3C64xx-based boards
using Device Tree.

Signed-off-by: Tomasz Figa <tomasz.f...@gmail.com>
---
 arch/arm/mach-s3c64xx/Kconfig           | 16 +++++++
 arch/arm/mach-s3c64xx/Makefile          |  1 +
 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c | 85 +++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c

Changes since v6:
 - Dropped the concept of .init_platform() callback and returned back
   to the old good abuse of .init_irq().

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index f78a6a0..fb4258c 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -308,3 +308,19 @@ config MACH_WLF_CRAGG_6410
        select SAMSUNG_GPIO_EXTRA128
        help
          Machine support for the Wolfson Cragganmore S3C6410 variant.
+
+config MACH_S3C64XX_DT
+       bool "Samsung S3C6400/S3C6410 machine using Device Tree"
+       select CLKSRC_OF
+       select CPU_S3C6400
+       select CPU_S3C6410
+       select PINCTRL
+       select PINCTRL_S3C64XX
+       select USE_OF
+       help
+         Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
+         enabled.
+         Select this if a fdt blob is available for your S3C64XX SoC based
+         board.
+         Note: This is under development and not all peripherals can be
+         supported with this machine file.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 645a8fe..6faedcf 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -57,3 +57,4 @@ obj-$(CONFIG_MACH_SMARTQ7)            += mach-smartq7.o
 obj-$(CONFIG_MACH_SMDK6400)            += mach-smdk6400.o
 obj-$(CONFIG_MACH_SMDK6410)            += mach-smdk6410.o
 obj-$(CONFIG_MACH_WLF_CRAGG_6410)      += mach-crag6410.o 
mach-crag6410-module.o
+obj-$(CONFIG_MACH_S3C64XX_DT)          += mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c 
b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
new file mode 100644
index 0000000..3384cb0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
@@ -0,0 +1,85 @@
+/*
+ * Samsung's S3C64XX flattened device tree enabled machine
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.f...@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk-provider.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include <plat/cpu.h>
+#include <plat/watchdog-reset.h>
+
+#include <mach/map.h>
+
+#include "common.h"
+
+/*
+ * IO mapping for shared system controller IP.
+ *
+ * FIXME: Make remaining drivers use dynamic mapping.
+ */
+static struct map_desc s3c64xx_dt_iodesc[] __initdata = {
+       {
+               .virtual        = (unsigned long)S3C_VA_SYS,
+               .pfn            = __phys_to_pfn(S3C64XX_PA_SYSCON),
+               .length         = SZ_4K,
+               .type           = MT_DEVICE,
+       },
+};
+
+static void __init s3c64xx_dt_map_io(void)
+{
+       debug_ll_io_init();
+       iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc));
+
+       s3c64xx_init_cpu();
+
+       if (!soc_is_s3c64xx())
+               panic("SoC is not S3C64xx!");
+}
+
+static void __init s3c64xx_dt_init_irq(void)
+{
+       of_clk_init(NULL);
+       samsung_wdt_reset_of_init();
+       irqchip_init();
+};
+
+static void __init s3c64xx_dt_init_machine(void)
+{
+       of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void s3c64xx_dt_restart(char mode, const char *cmd)
+{
+       if (mode != 's')
+               samsung_wdt_reset();
+
+       /* if all else fails, or mode was for soft, jump to 0 */
+       soft_restart(0);
+}
+
+static char const *s3c64xx_dt_compat[] __initdata = {
+       "samsung,s3c6400",
+       "samsung,s3c6410",
+       NULL
+};
+
+DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
+       /* Maintainer: Tomasz Figa <tomasz.f...@gmail.com> */
+       .dt_compat      = s3c64xx_dt_compat,
+       .map_io         = s3c64xx_dt_map_io,
+       .init_irq       = s3c64xx_dt_init_irq,
+       .init_machine   = s3c64xx_dt_init_machine,
+       .restart        = s3c64xx_dt_restart,
+MACHINE_END
-- 
1.8.2.1


_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to