The fixed_phy_add() function allows to register a fixed PHY. However, when this function gets called *after* fixed_mdio_bus_init() (which gets called at the module_init stage), then the fixed PHY is not registered into the phylib.
In order to address this, we add a call to mdiobus_scan() in fixed_phy_add() to ensure that the PHY indeed gets registered into the phylib, even if the fixed_phy_add() is called after fixed_mdio_bus_init(). This is needed because until now, the only code that was calling the fixed_add_phy() function was PowerPC-specific platform code, which could ensure that such fixed PHYs get registered before fixed_mdio_bus_init() is called. However, with the new of_phy_register_fixed_link() function, device drivers can parse their 'fixed-link' property and register a fixed PHY at ->probe() time, which may happen after fixed_mdio_bus_init() is called. Signed-off-by: Thomas Petazzoni <thomas.petazz...@free-electrons.com> --- drivers/net/phy/fixed.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index ba55adf..bd1e67a 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -195,6 +195,8 @@ int fixed_phy_add(unsigned int irq, int phy_id, list_add_tail(&fp->node, &fmb->phys); + mdiobus_scan(fmb->mii_bus, phy_id); + return 0; err_regs: -- 1.8.1.2 _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss