This moves the core module (CM) control base into the device
tree. It is a simple memory range of 0x200 bytes. Move the
cm header down into the machine directory and unexport the
cm_control() symbol as no modules are using it.
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
ChangeLog v2->v3:
- Actually git add the changes too. Mea culpa. Maybe I need
coffee?
ChangeLog v1->v2:
- Clarify and extend the documentation for the CM node and
its required regs propery.
---
Documentation/devicetree/bindings/arm/arm-boards | 19 ++++
arch/arm/boot/dts/integrator.dtsi | 5 +
arch/arm/mach-integrator/cm.h | 40 ++++++++
arch/arm/mach-integrator/core.c | 120 +++++++++++++++--------
arch/arm/mach-integrator/include/mach/cm.h | 38 -------
arch/arm/mach-integrator/integrator_ap.c | 6 +-
arch/arm/mach-integrator/integrator_cp.c | 3 +-
arch/arm/mach-integrator/leds.c | 3 +-
8 files changed, 148 insertions(+), 86 deletions(-)
create mode 100644 arch/arm/mach-integrator/cm.h
delete mode 100644 arch/arm/mach-integrator/include/mach/cm.h
diff --git a/Documentation/devicetree/bindings/arm/arm-boards
b/Documentation/devicetree/bindings/arm/arm-boards
index 5fdd7b9..0ebf3d9 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -11,6 +11,20 @@ FPGA type interrupt controllers, see the versatile-fpga-irq
binding doc.
Required nodes:
+- core-module: the root node to the Integrator platforms must have
+ a core-module with regs and the compatible string
+ "arm,core-module-integrator"
+
+ Required properties for the core module:
+ - regs: the location and size of the core module registers, one
+ range of 0x200 bytes.
+
+- cpcon/syscon: the root node the Integrator/CP must have a /cpcon
+ node pointing to the CP control registers, and the Integrator/AP
+ must have a /syscon node pointing to the Integrator/AP system
+ controller. The AP syscon node must include the logical module
+ interrupts.
+
In the root node the Integrator/CP must have a /cpcon node pointing
to the CP control registers, and the Integrator/AP must have a
/syscon node pointing to the Integrator/AP system controller.
@@ -25,6 +39,11 @@ example:
model = "ARM Integrator/AP";
compatible = "arm,integrator-ap";
+ core-module@10000000 {
+ compatible = "arm,core-module-integrator";
+ reg = <0x10000000 0x200>;
+ };
+
syscon {
/* AP system controller registers */
reg = <0x11000000 0x100>;
diff --git a/arch/arm/boot/dts/integrator.dtsi
b/arch/arm/boot/dts/integrator.dtsi
index 813b91d..0f06f86 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -5,6 +5,11 @@
/include/ "skeleton.dtsi"
/ {
+ core-module@10000000 {
+ compatible = "arm,core-module-integrator";
+ reg = <0x10000000 0x200>;
+ };
+
timer@13000000 {
reg = <0x13000000 0x100>;
interrupt-parent = <&pic>;
diff --git a/arch/arm/mach-integrator/cm.h b/arch/arm/mach-integrator/cm.h
new file mode 100644
index 0000000..2ba8be0
--- /dev/null
+++ b/arch/arm/mach-integrator/cm.h
@@ -0,0 +1,40 @@
+/*
+ * update the core module control register.
+ */
+void cm_control(u32, u32);
+
+struct device_node;
+void cm_init(void);
+void cm_clear_irqs(void);
+
+#define CM_CTRL_LED (1 << 0)
+#define CM_CTRL_nMBDET (1 << 1)
+#define CM_CTRL_REMAP (1 << 2)
+#define CM_CTRL_RESET (1 << 3)
+
+/*
+ * Integrator/AP,PP2 specific
+ */
+#define CM_CTRL_HIGHVECTORS (1 << 4)
+#define CM_CTRL_BIGENDIAN (1 << 5)
+#define CM_CTRL_FASTBUS (1 << 6)
+#define CM_CTRL_SYNC (1 << 7)
+
+/*
+ * ARM926/946/966 Integrator/CP specific
+ */
+#define CM_CTRL_LCDBIASEN (1 << 8)
+#define CM_CTRL_LCDBIASUP (1 << 9)
+#define CM_CTRL_LCDBIASDN (1 << 10)
+#define CM_CTRL_LCDMUXSEL_MASK (7 << 11)
+#define CM_CTRL_LCDMUXSEL_GENLCD (1 << 11)
+#define CM_CTRL_LCDMUXSEL_VGA565_TFT555 (2 << 11)
+#define CM_CTRL_LCDMUXSEL_SHARPLCD (3 << 11)
+#define CM_CTRL_LCDMUXSEL_VGA555_TFT555 (4 << 11)
+#define CM_CTRL_LCDEN0 (1 << 14)
+#define CM_CTRL_LCDEN1 (1 << 15)
+#define CM_CTRL_STATIC1 (1 << 16)
+#define CM_CTRL_STATIC2 (1 << 17)
+#define CM_CTRL_STATIC (1 << 18)
+#define CM_CTRL_n24BITEN (1 << 19)
+#define CM_CTRL_EBIWP (1 << 20)
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index e31483a..28bb033 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -22,18 +22,21 @@
#include <linux/amba/serial.h>
#include <linux/io.h>
#include <linux/stat.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <mach/cm.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
+#include "cm.h"
#include "common.h"
static DEFINE_RAW_SPINLOCK(cm_lock);
+static void __iomem *cm_base;
/**
* cm_control - update the CM_CTRL register.
@@ -46,12 +49,80 @@ void cm_control(u32 mask, u32 set)
u32 val;
raw_spin_lock_irqsave(&cm_lock, flags);
- val = readl(CM_CTRL) & ~mask;
- writel(val | set, CM_CTRL);
+ val = readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET) & ~mask;
+ writel(val | set, cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
raw_spin_unlock_irqrestore(&cm_lock, flags);
}
-EXPORT_SYMBOL(cm_control);
+static const char *integrator_arch_str(u32 id)
+{
+ switch ((id >> 16) & 0xff) {
+ case 0x00:
+ return "ASB little-endian";
+ case 0x01:
+ return "AHB little-endian";
+ case 0x03:
+ return "AHB-Lite system bus, bi-endian";
+ case 0x04:
+ return "AHB";
+ case 0x08:
+ return "AHB system bus, ASB processor bus";
+ default:
+ return "Unknown";
+ }
+}
+
+static const char *integrator_fpga_str(u32 id)
+{
+ switch ((id >> 12) & 0xf) {
+ case 0x01:
+ return "XC4062";
+ case 0x02:
+ return "XC4085";
+ case 0x03:
+ return "XVC600";
+ case 0x04:
+ return "EPM7256AE (Altera PLD)";
+ default:
+ return "Unknown";
+ }
+}
+
+void cm_clear_irqs(void)
+{
+ /* disable core module IRQs */
+ writel(0xffffffffU, cm_base + INTEGRATOR_HDR_IC_OFFSET +
+ IRQ_ENABLE_CLEAR);
+}
+
+static const struct of_device_id cm_match[] = {
+ { .compatible = "arm,core-module-integrator"},
+ { },
+};
+
+void cm_init(void)
+{
+ struct device_node *cm = of_find_matching_node(NULL, cm_match);
+ u32 val;
+
+ if (!cm) {
+ pr_crit("no core module node found in device tree\n");
+ return;
+ }
+ cm_base = of_iomap(cm, 0);
+ if (!cm_base) {
+ pr_crit("could not remap core module\n");
+ return;
+ }
+ cm_clear_irqs();
+ val = readl(cm_base + INTEGRATOR_HDR_ID_OFFSET);
+ pr_info("Detected ARM core module:\n");
+ pr_info(" Manufacturer: %02x\n", (val >> 24));
+ pr_info(" Architecture: %s\n", integrator_arch_str(val));
+ pr_info(" FPGA: %s\n", integrator_fpga_str(val));
+ pr_info(" Build: %02x\n", (val >> 4) & 0xFF);
+ pr_info(" Rev: %c\n", ('A' + (val & 0x03)));
+}
/*
* We need to stop things allocating the low memory; ideally we need a
@@ -87,27 +158,7 @@ static ssize_t intcp_get_arch(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- const char *arch;
-
- switch ((integrator_id >> 16) & 0xff) {
- case 0x00:
- arch = "ASB little-endian";
- break;
- case 0x01:
- arch = "AHB little-endian";
- break;
- case 0x03:
- arch = "AHB-Lite system bus, bi-endian";
- break;
- case 0x04:
- arch = "AHB";
- break;
- default:
- arch = "Unknown";
- break;
- }
-
- return sprintf(buf, "%s\n", arch);
+ return sprintf(buf, "%s\n", integrator_arch_str(integrator_id));
}
static struct device_attribute intcp_arch_attr =
@@ -117,24 +168,7 @@ static ssize_t intcp_get_fpga(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- const char *fpga;
-
- switch ((integrator_id >> 12) & 0xf) {
- case 0x01:
- fpga = "XC4062";
- break;
- case 0x02:
- fpga = "XC4085";
- break;
- case 0x04:
- fpga = "EPM7256AE (Altera PLD)";
- break;
- default:
- fpga = "Unknown";
- break;
- }
-
- return sprintf(buf, "%s\n", fpga);
+ return sprintf(buf, "%s\n", integrator_fpga_str(integrator_id));
}
static struct device_attribute intcp_fpga_attr =
diff --git a/arch/arm/mach-integrator/include/mach/cm.h
b/arch/arm/mach-integrator/include/mach/cm.h
deleted file mode 100644
index 202e6a5..0000000
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * update the core module control register.
- */
-void cm_control(u32, u32);
-
-#define CM_CTRL __io_address(INTEGRATOR_HDR_CTRL)
-
-#define CM_CTRL_LED (1 << 0)
-#define CM_CTRL_nMBDET (1 << 1)
-#define CM_CTRL_REMAP (1 << 2)
-#define CM_CTRL_RESET (1 << 3)
-
-/*
- * Integrator/AP,PP2 specific
- */
-#define CM_CTRL_HIGHVECTORS (1 << 4)
-#define CM_CTRL_BIGENDIAN (1 << 5)
-#define CM_CTRL_FASTBUS (1 << 6)
-#define CM_CTRL_SYNC (1 << 7)
-
-/*
- * ARM926/946/966 Integrator/CP specific
- */
-#define CM_CTRL_LCDBIASEN (1 << 8)
-#define CM_CTRL_LCDBIASUP (1 << 9)
-#define CM_CTRL_LCDBIASDN (1 << 10)
-#define CM_CTRL_LCDMUXSEL_MASK (7 << 11)
-#define CM_CTRL_LCDMUXSEL_GENLCD (1 << 11)
-#define CM_CTRL_LCDMUXSEL_VGA565_TFT555 (2 << 11)
-#define CM_CTRL_LCDMUXSEL_SHARPLCD (3 << 11)
-#define CM_CTRL_LCDMUXSEL_VGA555_TFT555 (4 << 11)
-#define CM_CTRL_LCDEN0 (1 << 14)
-#define CM_CTRL_LCDEN1 (1 << 15)
-#define CM_CTRL_STATIC1 (1 << 16)
-#define CM_CTRL_STATIC2 (1 << 17)
-#define CM_CTRL_STATIC (1 << 18)
-#define CM_CTRL_n24BITEN (1 << 19)
-#define CM_CTRL_EBIWP (1 << 20)
diff --git a/arch/arm/mach-integrator/integrator_ap.c
b/arch/arm/mach-integrator/integrator_ap.c
index 88a62a5..ece4755 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -57,6 +57,7 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
+#include "cm.h"
#include "common.h"
#include "pci_v3.h"
@@ -145,7 +146,7 @@ static int irq_suspend(void)
static void irq_resume(void)
{
/* disable all irq sources */
- writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+ cm_clear_irqs();
writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
@@ -447,8 +448,7 @@ static const struct of_device_id fpga_irq_of_match[]
__initconst = {
static void __init ap_init_irq_of(void)
{
- /* disable core module IRQs */
- writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+ cm_init();
of_irq_init(fpga_irq_of_match);
integrator_clk_init(false);
}
diff --git a/arch/arm/mach-integrator/integrator_cp.c
b/arch/arm/mach-integrator/integrator_cp.c
index 26b3441..422c3f9 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -36,7 +36,6 @@
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
-#include <mach/cm.h>
#include <mach/lm.h>
#include <asm/mach/arch.h>
@@ -49,6 +48,7 @@
#include <plat/clcd.h>
#include <plat/sched_clock.h>
+#include "cm.h"
#include "common.h"
/* Base address to the CP controller */
@@ -255,6 +255,7 @@ static const struct of_device_id fpga_irq_of_match[]
__initconst = {
static void __init intcp_init_irq_of(void)
{
+ cm_init();
of_irq_init(fpga_irq_of_match);
integrator_clk_init(true);
}
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 7a7f6d3..98fb74e 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -11,10 +11,11 @@
#include <linux/slab.h>
#include <linux/leds.h>
-#include <mach/cm.h>
#include <mach/hardware.h>
#include <mach/platform.h>
+#include "cm.h"
+
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
