On Fri, Sep 27, 2013 at 05:32:17PM +0100, Lukasz Czerwinski wrote: > This patch adds the document for STMicroeletronics Pressure Sensors > driver under Documentation/devicetree/bindings/iio/. > > Signed-off-by: Lukasz Czerwinski <[email protected]> > Signed-off-by: Kyungmin Park <[email protected]> > --- > .../bindings/iio/barometer/st_barometer.txt | 38 > ++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/iio/barometer/st_barometer.txt > > diff --git a/Documentation/devicetree/bindings/iio/barometer/st_barometer.txt > b/Documentation/devicetree/bindings/iio/barometer/st_barometer.txt > new file mode 100644 > index 0000000..5ce4bfa > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/barometer/st_barometer.txt > @@ -0,0 +1,38 @@ > +STMicroelectronics Pressure Sensors > + > +Required properties: > + > + - compatible : value should be: > + (a) "st,lps331ap" for barometer in LPS331AP
When you say "for the barometer in LPS331AP", is the LPS331AP a multi function device? Or only a barometer? > + (b) "st,lps001wp" for barometer in LPS001WP > + > + - reg : the I2C address of the barometer > + > +Optional properties: > + > + - st,drdy-int-pin : redirect DRDY on pin INT1 (1) or pin INT2 (2) (u8) > + > + - interrupts : Interrupt numbers for the ST barometer, as an array > + in case the barometer have more interrupt lines: > + <DataReady irq>, > + <Event irq>; > + > + - interrupt-names : Array of strings associated with the interrupt numbers The comments from patch 11 apply here too. > + > + - vdd-supply: Phandle to the Vdd supply regulator > + > + - vddio-supply: Phandle to the Vdd-IO supply regulator These seem fine. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
