On Oct 29, 2013, at 5:29 AM, Laurent Pinchart wrote:
> Document the device tree bindings for the sci serial port devices.
>
> Cc: [email protected]
> Signed-off-by: Laurent Pinchart <[email protected]>
> ---
> .../bindings/serial/renesas,sci-serial.txt | 51 ++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
> b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
> new file mode 100644
> index 0000000..5658b4f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
> @@ -0,0 +1,51 @@
> +* Renesas SH-Mobile Serial Communication Interface
> +
> +Required properties:
> +
> + - compatible: should be one of the following.
Being pedantic, but how about saying 'one of the following types (scif, scifa,
scifb, or hscif)
> +
> + - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
> + - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
> + - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
> + - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART.
> + - "renesas,scif-generic" for generic SCIF compatible UART.
> + - "renesas,scifa-generic" for generic SCIFA compatible UART.
> + - "renesas,scifb-generic" for generic SCIFB compatible UART.
> + - "renesas,hscif-generic" for generic HSCIF compatible UART.
> +
> + When compatible with the generic version, nodes must also list the
> + SoC-specific version corresponding to the platform.
> +
> + - reg: Base address and length of the memory resource used by the UART.
> +
> + - interrupt-parent: Reference to the parent interrupt controller.
> + - interrupts: Interrupt number(s). Depending on the SoC SCIx UARTs are tied
> + to one or multiple interrupt lines. When using multiple interrupt lines,
> + specify the interrupt names as described below.
> +
> + - clocks: Reference to the SCIx UART interface clock.
> + - clock-names: Should be "sci_ick".
> +
> +Optional properties:
> +
> + - interrupt-names: When using multiple interrupts, report the interrupt
> + names as "eri" (receive error), "rxi" (receive), "txi" (transmit) and
> + "bri" (break). When using a single interrupt this property should not be
> + present.
Hmm, is there a reason not to just have the 4 interrupts always present and in
the case they are all wired to the same interrupt, just have the interrupts all
be the same?
example:
interrupts = <0 144 4>, <0 144 4>, <0 144 4>, <0 144 4>;
> +
> +Note: Each enabled SCIx UART should have an alias correctly numbered in the
> +"aliases" node.
> +
> +Example:
> + aliases {
> + serial0 = &scifa0;
> + };
> +
> + scifa0: serial@e6c40000 {
> + compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
> + reg = <0 0xe6c40000 0 64>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 144 4>;
> + clocks = <&mstp2_clks 4>;
> + clock-names = "sci_ick";
> + };
might be nice to have an example with the 4 interrupts.
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by
The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
